Finally Found one!!

[tmv]

Originally Posted by ThalliumZA

look closer underneath

its the Diesel model but i would like to do the tips someday.

Look like some random pipings there. I've never seen a diesel model before so idk.

[J.Belknap]

Congrats! Welcome!

[JDM-20L]

Nice one!

Get that PCV changed when you can, it seemed to make a difference when I done my one(ran a bit better and seemed to blow a little less smoke).

Diesels don't get tailpipes exiting through the bar for those wondering, they dump out underneath the bar and the tips face the ground, its just not visible unless you get underneath.

[ThalliumZA]

Thanks for all the welcomes

Yeah, on the 3.0D, the tailpipes actually come from the front of the silencers, go around the side, and point down just underneath the bumber, if you look close on my pic, you can see both pipes underneath.

check this tmv and nebilex


some guys have cut off those tips, sealed the hole's in the front of the silencers, made new holes in the back and added tailpipes to there Diesels.

Thanks JDM, I'll look into that

[cannonfeet]

if you ever do the pipes, let me know as i need a set of the left and right side bumper blanks so I can run a center exit exhaust on my 4.4. Unless someone else knows where i can buy some (hint hint)

[mrbmwx5]

http://www.xoutpost.com/bmw-sav-foru...silencers.html