|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
05-15-2012, 06:05 PM
|
|||
|
|||
|
a.c compressor dont come on
hey guy my a.c compressor wont come on no warning at all
i tried to add freon but it wont take it seems to be full so i ran a hot wire direct to the compressor and it wont click is it safe to say the compressor is done? or is there anything else i could check i keep reading about Final Stage Resistor but i think thats only for blower problems my blower is working fine but the compressor wont kick on hence no cold air please help its hotttttttttt outside
__________________
03 X5 PIANO BLACK 22 INCH BEYERN BAROQUES 06 GS 430 MATADOR RED 22 INCH TSW NARDOS 
|
|
#5
05-22-2012, 12:55 AM
|
|||
|
|||
|
That assumption may be your problem. I'm not sure if that is a ground controlled system. Meaning the dme supplies the ground to activate the clutch and power is there all the time.
It might not be, were there 1 or 2 wires in the connector? And by measure the resistance I mean with an ohm meter, not your hand...
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
