different air suspension pain 4.8is

[sockethead]

Originally Posted by Ricky Bobby

sockethead, you were the one who popped in on my thread a few months back right? glad to hear my findings helped another member if thats the case.

Yep, that was me, thanks

[pnoyako85]

4.8MNSTR had this Problem..found out it was the "Blue" box underneath the cargo area malfunctioned ....so what he did...he ended up using a Separate Air Management system where you can adjust the height at Any speed your driving using his existing bags.......cost was $2k with pancake air tank plus other accessories i guess if you want.........
here is a vid of his X5 4.8MNSTR
his vid is minute 8:00-9:00 marker.............

http://www.youtube.com/watch?v=rtSpo...8s3nd4gVVvGbmA

[SlickGT1]

You can also convert to springs. I found out that you can remove the SLS from your Vehicle Order (VO) with NCS expert. Ha. I wouldn't do it though. Why lose a feature that actually makes the X5 drive-able on NYC streets.

[pnoyako85]

Originally Posted by SlickGT1

You can also convert to springs. I found out that you can remove the SLS from your Vehicle Order (VO) with NCS expert. Ha. I wouldn't do it though. Why lose a feature that actually makes the X5 drive-able on NYC streets.

we only gotta find a way to """Inactive Suspension"".....
and yes you can Adjust the Ride height at any level as you can adjust it through Digital Meter...which is I am looking into investing this type of feature down the road instead of lowering it...ill jjust go this route and put two bags infront...

[SlickGT1]

This has to be removed from SA
0220 00000000 0000000000000200 0000000000 1 NIVEAUREG //Level control system //Niveauregulierung
0221 00000000 0000000400000000 0000000001 1 LFEDER_2_ACHS //2-axle-air springing //2-Achs-Luftfederung (nur in Verb. mit High-Kombi)

SLS Inactive Message.
GM3 module,
NIVEAUREG - Nicht_Malden

[pnoyako85]

Originally Posted by SlickGT1

This has to be removed from SA
0220 00000000 0000000000000200 0000000000 1 NIVEAUREG //Level control system //Niveauregulierung
0221 00000000 0000000400000000 0000000001 1 LFEDER_2_ACHS //2-axle-air springing //2-Achs-Luftfederung (nur in Verb. mit High-Kombi)

SLS Inactive Message.
GM3 module,
NIVEAUREG - Nicht_Malden

slick will this Removed the inactive ?...on the dash?.

[SlickGT1]

Originally Posted by pnoyako85

slick will this Removed the inactive ?...on the dash?.

Yes. That one line is all you need. Problem is the EHC will still look for SLS stuff, but the SLS message will go bye bye. If you want to remove the EHC components, you need to modify your SA, as in remove all the EHC stuff.

[pnoyako85]

Originally Posted by SlickGT1

Yes. That one line is all you need. Problem is the EHC will still look for SLS stuff, but the SLS message will go bye bye. If you want to remove the EHC components, you need to modify your SA, as in remove all the EHC stuff.

give me a call my boy is looking for this service asap......wondering if your available today....

[SlickGT1]

Originally Posted by pnoyako85

give me a call my boy is looking for this service asap......wondering if your available today....

I won't be able to get to try this till Friday evening. And he would have to be the first to test this out. It should work though. I'll call you later. On the phone for the past 2 hours with client.