Driver side door lock not working after replacing door handle carrier

[gchristofi]

Originally Posted by Madams0325

I had the same problem. What I did was, turn the key in the on position and I unplugged and then reconnected all 3 wire connectors on the back of the front driver side window switch, and that fixed the problem for me.

Excellent advice... I just finished replacing the window regulator and had the same issue with non functioning door solenoid. Thought I was going to have to strip the door down again to fix a connector I'd knocked but found this thread which saved me a lot of time thanks. For reference, I only removed and replace the 2 smaller connectors on the window module with the key in position 1 and the door closed.

[ToadFMB]

This thread helped me today. Last weekend I replaced the window regulator clip on my front passenger side, after getting the door all buttoned up, I thought I was done until I realized my front passenger door wouldn't lock via the center console button or key fob.

I turned the ignition to the "on" position, unplugged the 2 smaller wires, plugged them back in and all is well again.

Thanks!