|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
11-20-2012, 12:33 AM
|
|||
|
|||
|
P0306 When Starting Cold
2006 3.0 with 67,000 miles. When I start cold I get a p0306 misfire cylinder 6 code. I changed the coil pack, I changed the spark plug. I still got the code with cold starts. I swapped the coil packs and plugs around from cylinder to cylinder and the problem stayed with cylinder 6. If I shut it off and restart it goes away, sometimes if I rev it, it goes away. Then I got a p0365 crankcase position sensor B bank 1. I replaced the sensor and the code cleared. I still get the misfire on cylinder 6 with cold starts though. I took the DISA off and inspected, it seems ok. I see no leaks in the intake boots. Any ideas? Thanks!
__________________
2000 323ci ZSP Hellrot/Black(sold) 1995 M3 Alpine/Black 2005 M3 Alpine/Imola 2006 X5 3.0 Black/Black 
|
|
#2
11-20-2012, 05:51 PM
|
|||
|
|||
|
|
|
#4
11-21-2012, 01:50 AM
|
|||
|
|||
|
Thanks for the link. I too hope that I don't have to pull the cylinder head off. Could you see the failure in your gasket when you took the head off?
__________________
2000 323ci ZSP Hellrot/Black(sold) 1995 M3 Alpine/Black 2005 M3 Alpine/Imola 2006 X5 3.0 Black/Black
|
|
#5
11-21-2012, 02:53 PM
|
|||
|
|||
|
Nope, not in the gasket or sealing surfaces of the head or block.
But the tops of 2 pistons were steam cleaned and and looked brand new. The other 4 had some carbon/sludge build up Sent from my SGH-i917 using Board Express
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
