Need Used 3.0 Engine for my 2004 6M/T

[Skyline]

Originally Posted by pickncrew

- I pressurized the cooling system while it was cold, 20psi and held for 2-mins like the manual states, without going down.

- Only visible sign of coolant leakage is out the radiator cap (blows off as pressure builds) and there is some white exhaust even after warmed up but hard to tell that when it's cold outside right now.

- Cooling system was flushed out pretty good... and stop leak still holding after a week.

How is this different symptom wise than before you used the stop-leak?

You should be able to check the cap with your pressure tester.