LED Reverse Lights Installed

[patrickkc]

I have leds as my reverse lights too. Mine are a bit different though, much much brighter. I'm running 25w projector leds as my reverse lights.

[TerminatorX5]

Originally Posted by patrickkc

I have leds as my reverse lights too. Mine are a bit different though, much much brighter. I'm running 25w projector leds as my reverse lights.

picture of the LEDs? source? price?

[jgold47]

Like these?

7506 P21W CREE LED Projector Bulb 25W DRL Reverse Backup Light Signal 1156 White | eBay

[jgold47]

or like these?

HPX 1156 HID Reverse Light Conversion Kit

wouldnt the HID's melt the plastic?

[patrickkc]

Originally Posted by TerminatorX5

picture of the LEDs? source? price?

I will go take pictures tonight! as some of you know, I started selling H8 angel eyes recently, so I also got the brightest 1156 projector leds.

They are similar design as that on the ebay link, but I'll take pictures later and post.

[Lexicon740iL]

Originally Posted by papasmurf

Eh, I have yet to find an LED that's actually brighter than a stock 7506 bulb. They LOOK brighter until you put a stock bulb in one and an LED in the other.

I will measure it with a light meter at work on monday and get post which has higher lumens. I doubt it's going to be the stock bulb.

Here is a side by side.... Drivers side LED Passenger is stock.




Your HID does sound nice...I almost put them in my E39 but I remember forum members that did the retrofit complaining about melted housings and harnesses.

[XCUSM5]

Those CREE projectors look awesome

[papasmurf]

Originally Posted by Lexicon740iL

I will measure it with a light meter at work on monday and get post which has higher lumens. I doubt it's going to be the stock bulb.

Here is a side by side.... Drivers side LED Passenger is stock.




Your HID does sound nice...I almost put them in my E39 but I remember forum members that did the retrofit complaining about melted housings and harnesses.

A fresh 7506 was brighter for sure. This was 2 years ago, but I still haven't had anything brighter than the HID. The trick with HID reverse lights is to use a 15W kit. A 35W kit would easily melt the housing, while a 15W lights up nicely and doesn't melt anything. I've had HIDs in the reverse lights for over a year, and no problems. I've also left them on for extended periods of time with no problems.

[jgold47]

I installed. I like! seem brighter for sure.

[Ricky Bobby]

When I finally get coding to turn off cold and warm bulb checks for my tails, reverse lights, turn signals, lic plate lights etc I will def pick up a set of these for reverse.

I have invisibulbs hyper white halogens now which are a nice color but def not that much lumens