I need some help, No power to only 1 window motor

[bigfatty]

So my rear passenger window stop moving about 1/3 of the way down. I figured regulator at first, until I noticed the motor was making ZERO noise. So I pulled the door apart and after my testing, just that window motor is not getting any power.

Use door window switch: nothing
Use Driver switch: nothing
Roll down windows with key FOB: nothing
Door locks: works fine
The window switch light in the switch itself: works fine
I checked all fuses that were window related: all good
Put voltmeter on plug: nothing
Just to make sure, I put 12 volt power to the window motor itself: works fine
Manually move window up and down on regulator with no motor: works fine

Soooooooooooooo could anyone point me in what direction to go? I have the door apart for the next couple of hours before I need to drive again. So if there is anything I need to do with the door panel open, let me. I appreciate your help!!

2005 X5 3.0

[xXJDMcivicEK9Xx]

are you getting power to the window switch itself? could it be a relay thats gone out somewhere?

[bigfatty]

Originally Posted by xXJDMcivicEK9Xx

are you getting power to the window switch itself? could it be a relay thats gone out somewhere?

I did not check the switch itself but the light in the switch is good. Also the driver control switch will not work and using the key fob to roll down the window will not work so I think the problem is before that.

I am thinking relay as well, any idea where a window relay would be?

Thanks for your help man!

[xXJDMcivicEK9Xx]

from a quick search it looks like its behind the glove box