|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
12-26-2005, 02:15 PM
|
||||
|
||||
|
Thicker anti-roll (sway) bars
Eibach do a kit with (front): 34 mm and (rear): 26 mm. Standard sizes are(front): 29mm (rear): 23.5mm
__________________
|
| Sponsored Links | |
|
|
|
|
#2
12-26-2005, 04:15 PM
|
||||
|
||||
|
I'd be interested to hear more about experiences with these too. I've done this to a couple of past cars (1985 Toyota Supra & 1999 2 dr. Tahoe) with very good results, but before making a swap like this on the X, I'd really like to hear from someone w/first hand experience first...
|
|
#3
12-26-2005, 04:18 PM
|
|||
|
|||
|
i heard the ride gets really rough..but i wanna do this mod too!
__________________
|
|
#4
01-07-2006, 05:25 PM
|
|||
|
|||
|
It seems like eibach only specifies these, for the 3.0, 4.4 and 4.6 wit rear air suspension. NOT for the 4.8 that have all around air suspension.
__________________
Last edited by AlpineMsix; 01-07-2006 at 05:54 PM.
|
|
#5
01-07-2006, 08:41 PM
|
||||
|
||||
|
I had the Eibach sways on my 4.6is and one of the side effects is a "clunking" noise from the front swaybar as it keeps hitting the frame due to its increased thickness, the same happend to a friend of mine who installed the Eibach sways on his 4.6is. I removed them from my 4.6 again as the biggest bang for the buck are the Dinan camber plates. They dramatically improve handling and are not too difficult to install.
- Jan
__________________
National Rental Cars....
|
|
| Bookmarks |
|
|
|
|
Linear Mode
