scotchprint/Dinoc color that best approximates handles

[jgold47]

Looking for the dinoc/scotchprint color that best looks like the existing door handles in the e53. Basically, I want the titanium interior trim look. Anyone have any experience. I think I will stay away from the carbon fiber look.

thanks

[SammyD]

Subscribed, I'm in the same boat...

[Ricky Bobby]

x3.


First of all don't use Dinoc, Scotchprint 1080 is much easier to work with for interior trims, Dinoc was used prior to 1080 being available in as many colors and textures as it is now, Dinoc was not made to be an interior wrapping film, it was actually supposed to be used as architectural film on buildings.

Secondly, do you want gloss or matte/satin look to your trims? I know for a fact that G120 Gloss White Aluminum (ignore the name) matches almost perfect to our titan door handles on the pre-facelifts.

However, I know that facelift models have a slightly darker graphite door handle, so my findings may not be the same for a 2006. I don't know how keen I am on having a "gloss silver" trim, but I definitely need to get my trims re-wrapped, the wood seriously is killing me and aging my interior immensely.

[tmv]

^Door handle on prefacelift is silver and it's darker/titanium color in my 4.8iS.
I used 3M Scotchprint Brush Aluminum vinyl to wrap interior trims for a local E39 owner. He has Silver exterior and the wrap match that pretty good. It has a little texture in there, instead of just blain smooth vinyl.

In the car

I also used it to wrap the picece on the shift knob of my 4.8iS. That piece is painted some how and look pretty bad.
Before with the paint

After with the wrap and in the car. It match 95% to the silver trim I have.



I would use that if the door handle in your X is silver. If it's darker, I would use Brushed Titanium. Material was bought from metrorestyling.com
I hope this help somewhat with your choice.

[jgold47]

big time. I was leaning towards dinoc vs scotchprint as my trim has some cracks and I understand DiNoc does a better job of hiding the cracks.

Can anyone confirm?

Also, it it your pictures or is that trim really that bright?

Perhaps the titanium would be a better choice?

[Ricky Bobby]

damn tmv now you make me want to wrap in brushed aluminum! I hear that the aluminum films are harder to wrap though because of the metals in the film, or is that a myth?

[jgold47]

Also how much should I need to do the whole interior?

[tmv]

Originally Posted by jgold47

big time. I was leaning towards dinoc vs scotchprint as my trim has some cracks and I understand DiNoc does a better job of hiding the cracks.
Can anyone confirm?
Also, it it your pictures or is that trim really that bright?
Perhaps the titanium would be a better choice?

Neither of them can hide the crack on the wood trim. You would need to fill and sand the cracks if you want to hide it under the wrap.
Brushed Aluminum trim is bright. What color is your interior?

Originally Posted by Ricky Bobby

damn tmv now you make me want to wrap in brushed aluminum! I hear that the aluminum films are harder to wrap though because of the metals in the film, or is that a myth?

Depend on the material and your skill, but they are pretty much the same to me since I have wrapped a few sets already.

[Ricky Bobby]

Hmmmm Idk I'd ask tmv, vinyl is cheap but I think you could be fine with 10-12 sq ft, get some primer 94 adhesive for the backside of the pieces too (helps the vinyl that you folded over stay put)

[jgold47]

hmm.. I have a black interior. I want to approximate the look of my e46 which had the silver trim. How visible are the cracks when you wrap?