turning a 4.4L to 4.6L

[GOFAST GUY]

Since there is such a big HP difference between 4.4L and 4.6L I ask the forum now what parts must be exchanged in order for this to happen?

[mgmarsh39]

There is more to it than just swapping a few parts. I think other's have said you're better off super charging it.

[nate13]

In short:

Remove your current 4.4 X5 from driveway.

Clean driveway.

Install replacement 4.6 X5 into driveway. Torque to 44ft lbs.


In all seriousness, at least pistons, cams, and transmission upgrades; not even considering any exterior modifications to look the part.

[BMRSEB]

If not too concerned about the unique 4.6L parts/appearance, just get an '04 - '06 4.4L. The HP difference is less so, ~25HP or so...

[J.Belknap]

Engine, transmission, DME, EGS, stiffening plate (has cooling duct), front and rear differentials.

That's the big stuff, anyhow

[GOFAST GUY]

I'm not concerned with the outward appearance; mainly just the engine and upgrading the performance to what the 4.6 offers. I have a 4.4L apart now and am thinking about boring it out, sleeving it to get it to 4.6L but what else would I need aside from new software? Would the transmission not be able to handle the extra power? Dinah sells a S/C kit that brings hp to 412, which is impressive.

[J.Belknap]

The Dinan S/C kit would be less invasive than an engine overhaul, and a better bang for the buck. They've tested the 4.4i kit like any other Dinan product, the transmission will be ok to deal with the torque.

How far apart is the 4.4 motor?

[GOFAST GUY]

Down to the block. The heads are on the bench.

[J.Belknap]

Eh, maybe give VAC a call. They do some pretty gnarly head work.

[GOFAST GUY]

I'm looking into a number of options so we'll see what happens. I want to try to achieve something most wouldn't tackle and since it's not like my daily driver is waiting to go back together, time is on my side with this project.