|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
09-05-2013, 05:52 PM
|
||||
|
||||
|
Is This window Regulator Toast?
Hey guys, well I finally had a window failure happen to me, after I took the door panel apart it looks like both ends of the cable came off. They only broken part I see is the guide rail window clip, you can see it's cracked in half in the pic. The other clip that usually breaks is ok, but I'll replace it since I have everything apart. So what do you guys think, is the motor/regulator salvageable if I re-thread the cable or should I just replace it? The last pic I found this in the bottom of the door, anybody know where it goes?
__________________
2002 X5 4.6is 1999 C5 Corvette 1992 Mitsubishi 3000GT VR-4 1994 Kawasaki ZX-9R 2005 Mazda 6 Wagon (Wife's) 1991 Mitsubishi 3000GT VR-4 Last edited by romeokc10; 09-05-2013 at 06:05 PM. 
|
|
#2
09-05-2013, 06:17 PM
|
||||
|
||||
|
The motor is ok, but the reg is shot. The cable in crimped in a few places which will hinder the performance of the regulator when the cable is wound on the wheel. I would replace it. As for the last plastic piece, looks like one opf the pins for the door card that go around the edges of the door.
__________________
2011 E70 50i M Sport Exterior: Alpine Weiss III Interior: Nevada PACKAGES: . 
|
|
#3
09-05-2013, 06:26 PM
|
||||
|
||||
 TT is absolutely correct!!!!
|
|
#4
09-05-2013, 07:01 PM
|
||||
|
||||
|
Cool, thanks guys, I'll get a new regulator and replace the black window clips while I'm in there.
__________________
2002 X5 4.6is 1999 C5 Corvette 1992 Mitsubishi 3000GT VR-4 1994 Kawasaki ZX-9R 2005 Mazda 6 Wagon (Wife's) 1991 Mitsubishi 3000GT VR-4
|
|
| Bookmarks |
|
|
|
|
Hybrid Mode
