Unable to disabled my 2005 front parking lights

[ArmyX5]

I just started using the coding program NCS Expert which I have in my laptop, but I cannot get my front parking light to be disable. I have programmed the LCM and changed the following lines;

KEINE_PARKLICHT_FUNKT
aktiv

BLK_V_GED_ALS_PARKLICHT
nicht_aktiv

but my yellow front site marker will still come on when I turn the lights on! Here is copy of my LCM code.
any help is appreciated.

Thanks in advance.

[Ricky Bobby]

see this thread.

http://www.xoutpost.com/bmw-sav-foru...-forget-9.html

If you already have the second line as "nicht_aktiv", what does making that first line "nicht_aktiv" do?

[TerminatorX5]

seems that you are trying to program ALL modules at once... try to read, and then program one module at a time...

there are few options for the front parking lights:

1. on with the rest of the parking lights when engine is on and engine off, key in position 2
2. off, while the other lights on, engine is on, but come back on when engine is off, key in position 2
3. off (only turn signals operational)

the 1 and 3 are obvious, the 2 is working like this - you are driving around, your headlights or parking lights are on (auto or manual), the front corners are OFF. You are parking the car, shut off the engine but continue to listen to radio - the main headlights are off, since the engine is not running, but those corners that were off while engine was running, come on and stay on until you turn the car completely off, or turn the switch off...


all in the programming, i just don't don't remember the lines off the top of my head right now...

[ArmyX5]

Found it.

disable corner/parking lamp, KMBI ->, LCM ->,

it is not:

BLK_V_GED_ALS_PARKLICHT
nicht_aktiv


the correct line is:
-BLK_V_GED_ALS_SIDEMARTK
nicht_aktiv


Thanks Ricky and Terminator. Everything is working as I wanted.

I went back to http://www.xoutpost.com/bmw-sav-foru...-forget-9.html
and read it again.