|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
11-03-2013, 11:21 PM
|
|||
|
|||
|
Ride height recalibration needed?
I just got my front arnott bags installed and i noticed one side is lower than the other. This was done by 2 different shops because the first shop didnt do the job properly.
The reason im wondering though if its a the calibration that needs to be done is because arnott ended up having to mail a new bag out to me and this new bag has a stainless steel finish at the base, while the original bags had a black finish at the base. These are not the entire strut, but just the bags. I reused my struts. I find it hard to believe that arnott changed their bag dimensions after all these years and one is shorter than the other.    
__________________
2005 4.8is. Blue ext, white int. Last edited by xRide; 11-03-2013 at 11:46 PM. 
|
| Bookmarks |
|
|
|
|
Threaded Mode
