Those with INPA, how do you activate ABS Pump?

[SlickGT1]

I went nuts yesterday trying to figure out how to activate the ABS pump with INPA. Imagine my surprise when the motive bleeder connected, car on ramps, and I can't figure out how to make the pump work. The closest I could find with any valve activation is in the DCS, and there were a few valve activation options in there. In DIS, this was way simpler, but my VMWare is completely fried, and I was trying to avoid formatting the computer to re-install everything.

Let me know if I am missing something, or if INPA can't do it at all for our cars.

I know on the e39, I had the option of activating each corner. I don't even see that type of options here.

[Turbo_Bimmer]

Slick, Inpa can activate the pump and solenoids, I remember seeing those buttons somewhere. BUT I wouldn't do it with Inpa because if the pump is started and not the good solenoid(s) is(are) opened, a too high pressure condition may occur or other unwanted behavior.
I know, this doesn't help you a lot, but I would try to fix the DIS to use the bleedin procedure.

[SlickGT1]

I had that feeling. Was doing some digging on the web, and it seems that INPA you really need to know what you are doing to be able to actuate it, even for the cars that you have those options.

I think I am going to try and get this thing to run on a different machine, hopefully. I don't want to lose INPA by screwing something up.

[4.8isX5]

What errors are you getting with DIS? Mine randomly stopped working and i fixed it all yesterday. I do IT so i have a good amount of knowledge to help you fix an issue quick. Let me know.

[SlickGT1]

I was running it through VMware. Right now, I can't get VMware to run at all. I tried re-installing it, but it still wont work. My buddy told me that chances are something is corrupt, and it will most likely need a format.