|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
07-15-2014, 05:16 AM
|
|||
|
|||
|
ZKE Central Body electronics ISSUE. Please HELP!
No interior lights, No Alarm, No Remote Control, No Front window wipers, No Central Locking and I have doubt No ABS also. I scanned it with P.A. soft (bmw scanner v1.4) and it shows in ZKE Central Body electronic- Is in energy saving mode. Transport Mode. I tried to reprogram/Unit Mode to Normal Mode, but it gives error message Unit Setting: Filed . and Error about Energy Saving Mode also can not be deleted. I tried so far: 1. To rewrite EEROM and Coding data from backups which I made some months ago. It writes without giving errors, But still can not reprogram Unit Mode to Normal. 2. Disconnecting Battery Negative Terminal for an hour. No Result 3. Disconnecting and connecting both + and - Terminal simultaneously. No result. 4. Battery voltage 12.4 , Charging 13.4 to 13.7 V. So this is not issue caused by battery Is there a way to RESET this Module mechanically? Or what to do? Might be last try will be to re-install new module and to program it, but Module is responsive, and when making changes in Coding menu its works ( for instance, Lock Doors automatically after car reaches 8 km/hr), but it Stucked in TRANSPORT MODE. Last edited by vedmini; 07-15-2014 at 07:05 AM. 
|
| Sponsored Links | |
|
|
|
|
#3
07-15-2014, 01:21 PM
|
|||
|
|||
|
Sounds like it's the module that's kaput
__________________
2006 X5 48is Black / Black - LED AEs - FCAB - GAS 1.2bar cap
|
|
#4
07-15-2014, 02:38 PM
|
|||
|
|||
|
Module makes response on writing coding. If its kaput how it may control automatic door locking after car reaches 8 km/hr/ when I change programming code not to do so it stops doing that, which means it still a live . Is there a way to reset GM Module?
|
|
#5
07-15-2014, 10:17 PM
|
|||
|
|||
|
Check out BMW General Module 5 (GMV, ZKE V)
Fixed my LCM quick and easy
__________________
A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools. -Douglas Adams  2003 X5 4.6is Estoril Blue 2005 Infiniti G35X 1972 Datsun 240Z 1991 Isuzu Impulse XS Sold 1972 Fiat 850 Spyder Donated 1972 Datsun 240Z Sold 1972 Datsun 510 Sold 
|
|
#6
07-17-2014, 12:55 PM
|
|||
|
|||
|
ISSUE RESOLVED!!!!
Thanks to marcozandrini for his input. I used that procedure which he wrote in the following tread . Trans failsafe program after jump start - Bimmerfest - BMW Forums Last edited by vedmini; 07-17-2014 at 03:43 PM.
|
|
#8
07-17-2014, 03:17 PM
|
|||
|
|||
|
link is broken
__________________
2006 X5 48is Black / Black - LED AEs - FCAB - GAS 1.2bar cap
|
|
#9
07-17-2014, 03:43 PM
|
|||
|
|||
|
Trans failsafe program after jump start - Bimmerfest - BMW Forums
This procedure resets almost everything (Does not resets odometer  ) and car runs like it just arrived from the shop 
Last edited by vedmini; 07-17-2014 at 03:49 PM.
|
|
| Bookmarks |
|
|
|
|
Linear Mode
