|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
12-31-2016, 11:41 AM
|
|||
|
|||
|
Need 1 washer nozzle
It has a variety of small problems that I don't blame the dealer for not noticing (good dealer to buy from, Peake in New Orleans). One thing was a front windscreen washer nozzle. The nozzle is fine but it is broken of the mount that attaches to the underside of the hood. BMW only sells the complete washer hose system for over $100. Anyone have an old washer hose or just the nozzle they would sell? THanks John (Boston) 
|
| Sponsored Links | |
|
|
|
|
#2
12-31-2016, 01:08 PM
|
||||
|
||||
|
Not a single nozzle, but maybe he'll part this out for you...
11 12 13 BMW X5 X6 E70 E71 FRONT WINDSHIELD WASHER NOZZLE SET OEM Here's a nozzle only: New BMW X5 e70 Windshield Spray Nozzle 61 66 7 161 469 , 61667161469 | eBay Another nozzle only: https://www.ecstuning.com/b-genuine-...h/61667161469/ Thanks, John
__________________
 2008 4.8i X5 (2/25/08) 105k: Titanium Silver/Black; All -HUD; Aero Kit; 22" VS-130 w/Pirellis; ///M Shifter & Fr Brakes; Gauge Rings; Console Pads; Custom Wheel & Mats; Roof Rails Carbon Fiber: Int Trim, Nav Surround, Grill, Cluster Trim, Shifter & Eyelids 1.2" H&R; LUX AEs; LCI Tails; Rear Fogs; NBT EVO; ESS Tune; Meisterchaft GTC Exhaust Last edited by 95wildtt; 12-31-2016 at 04:55 PM.
|
|
#3
01-01-2017, 02:23 AM
|
|||
|
|||
|
thanks for the links.
These don't look anything like my washer nozzles. Mine do not have a screw adjuster and they fit onto a vertical "post" that juts down from the square piece that fits into the holds on the underside of the hood. The ones in your links look FAR MORE ROBUST as there's no fragile post to break off. Also, my X5 (05/10 build), looks like it only has two nozzles, where as the parts page on REALOEM shows 3 nozzels. I don't think there's a 3rd hole in the hood for the 3rd nozzle. Anyway, these look perfect to retro fit in place of my original and broken nozzles. Thanks again.
|
|
| Bookmarks |
|
|
|
|
Linear Mode
