|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
E70 4.8l V8 Coolant Drain Point location (Engine block).
I have located the radiator drain point but I can only get 5 litres out of the car from here. The rest is in the engine block. Coolant pump is mechanical not electronic. I replaced the upper hose from the Radiator to the pump (leaking o-ring). I don't want to start disconnecting everything either to drain. If someone can tell me or show me where the plug is located. Many Thanks Sent from my E6683 using Tapatalk |
Sponsored Links | |
|
#2
|
|||
|
|||
#3
|
|||
|
|||
I have been draining my system multiples times over the past week. Max I can get is 7 liters plus whatever was under the valley pan. Not easy to drain it all. Use distilled to flush it. I've gone through 10 gallons of distilled to flush.
Sent from my iPhone using Xoutpost.com |
#4
|
|||
|
|||
Thanks guys. Yes I have flushed and cycled the engine a few times now. I think I will have to dissemble more hoses to drain it all. Have to say it's a bad design for an engine. BMW must have purposely designed it like this. The hoses around the engine are easy to install, (Quick connect type), but not service of coolant, No, this needs special equipment and procedures. Haha.
Sent from my E6683 using Tapatalk |
Bookmarks |
|
|
|