Possibly Fried My Already Bad FRM..help

[Isosunrise91]

And im back to the e70 forums again. Wanted to thank the few that chimed in on my last post regarding a leaking OFHG and OCHG. This was the issue and had this fixed at a well known indy in my area.

Now today is a whole other issue and could really use some help. For most of the long weekend I have been toying with NCS Expert & INPA. Only have a few issues in INPA such as not being able to read the Transmission module.. I believe its a bad install somewhere. Anyway everything else in INPA works and is very helpful.

I then moved on to NCS Expert where I coded 3 or 4 modules with no problem.

I saved the best for last, the FRM. I did this as I knew I could possible mess this up. Well I guess I did.... maybe.

In INPA I was showing A8AC followed by the number 64 when I read all codes.

Again, I coded other modules no problem. Saved FRM for last "executed job" and boom, CIC restarted followed by all lights going out and have no lights what so ever. Only thing working is door locks, no alarm.

Could this be that the FRM is fried and the typical issue thats covered by BMW? I bought the car used from a third party and it doesn't appear FRM was ever replaced. Car is a 2011 with 99k on it. Per the car fax it was 'sold' in September of 2010. Did I miss the cut off? Could this be a short circuit.. Im stuck now. Any help is appreciated.