|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Getting back to the wiring part of this...
My BMW dealer was kind enough to run the blue (brake control output) wire for me when I had my hitch installed.
I chose a Prodigy P3. I made the connection to the lighting control module to pick up the brake light signal (see the FAQ's on this website). I've attached a photo of that connection which is located in the passenger side kick panel below the dash. I removed the interior trim pieces from the passenger footwell and fished the wire through from passenger to driver's side. Very simple. The remaining connections were made (+12V and ground) and the control was mounted to the driver's side dash as shown in the other photo. I'm not entirely happy or unhappy with the location I chose. It's easy to bump your knee on when getting in. But I also wanted it to be easily reachable with my non-dominant hand in case I had to apply trailer brakes independently. It's also easily visible to verify proper functioning. The P3 mount allows you to quickly detach the controller and remove it when not in use. |
|
#2
|
|||
|
|||
|
Man, you guys have driven down the path I just started and have answered some questions. I have a 2007 4.8l X5, which has a 2" factory reciever installed (it has a 7 prong electrical connector - but as far as I know, only 4 wires are connected). I had it installed when I purchased the X5 to pull my small 10' cargo trailer (which has a hydrolic surge brake).
Now I just purchased a travel trailer (Coyote Lite CL232SS - 4665lbs UVW dry and is 27' hitch to bumper - brochure pic below). I also had the dealership (Calgary) tell me that they would not have anything to do with installing an after-market brake. I will head back and press them to ensure the wiring is run to the front. The RV dealer seems to have no issues installing the brake - even on a BMW. I also purchased a 750# Blue Ox SwayPro which functions for both weight distribution and sway control. I will need it for pulling in Alberta & BC (windy on the prairies and in the mountains). I will let you know how the wiring & brake installation goes, as well as how the sway bar works and the old gal pulls. The pics above for the wiring are very helpful. Thanks. |
|
#3
|
|||
|
|||
|
Who's the blonde hottie (from a far) in the pic?
__________________
2004 Porsche 911 C4S X51, Seal Grey / Black 2006 Porsche Boxster S, Guards Red / Sand Beige 2008 BMW X5 4.8i, Black Sapphire / Saddle Brown 2001 Audi A4 1.8tq, Laser Red / Black, APR Stage 2, H&R Coilovers 2002 Suzuki GSX600 Katana, Yellow |
![]() |
| Bookmarks |
|
|
|
|