|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
02-12-2009, 02:10 AM
|
||||
|
||||
|
Is it possible to adjust the angle of windshield washing nozzle?
I found that the windshield washing fluid coming from the nozzle does not reach high enough. However, when I try to adjust the nozzles, they look like fixed. Is there any way to adjust the angle of those nozzles? 
|
| Sponsored Links | |
|
|
|
|
#2
02-12-2009, 06:27 AM
|
||||
|
||||
|
check that the pipe coming into the nozzles is firmly in place. Mine popped out and it had this effect. Pushing it back in made the nozzles squirt all the way up the screen. Lift the bonnet (hood in U.S. English!) and look under the nozzle - it looks like it is in place but push it to make sure it is located properly. Also if it is not seated properly you will have leakage from the nozzle which you can only see with the bonnet open.
__________________
StumpyPete  Current: gone over to the dark side of Ingolstadt due to BMW unreliabilty Previous: Xena III E70 3.0si, Space Gray Previous: Xena II E53 3.0i SE, Manual, Toledo Blue Previous Previous: Xena E53 3.0i SE, Manual, Topaz Blue
|
|
| Bookmarks |
|
|
|
|
Linear Mode
