2011 X5M wheels on a 2008 X5??

[hbhog21]

Does anyone know if wheels off of a 2011 X5M will fit on my 2008 X5? I can't seem to get a straight answer from the dealership. The wheels are 21x10 in the front and 21x11.5 in the rear. They are OEM BMW wheels. Any help would be greatly appreciated!
Thanks

[mavic1010]

the fronts will fit. The rears will not unless you bore out the center.

[Stephen.Gazard]

See my earlier post:

http://www.xoutpost.com/bmw-sav-foru...it-wheels.html

[hbhog21]

Thanks for the help it's greatly appreciated! Mavic- Do you know the cost associated with boring out a wheel..or is it to much of a hassle? Kinda new to this stuff. Secondly if I were to put my stock x5 rims on a x 5m would I need an adapter or something? Stephen..nice car btw!
Thanks

[motordavid]

Imo, a decent machine shop or, auto joint with a tradesman that cares, can easily bore out that hub dia to fit...
it's ~ 72mm out to ~74mm.

There are a couple threads on the Board where posters have reported good success with the process.
It isn't like doing an clean up or over bore on engine cylinders.

Cost? I am guessing $2 Bens tops...inc. tip.

Typical dlr sales gang: don't know crap from shinola...
GL, mD

[hbhog21]

I'm thinking of getting the wheel spacers from turnermotorsports.com..any thoughts? Would it push the wheel out past the fender? The wheels are the 215's off of a 2011 x5m in black. Anyone used a wheel spacer with a 21x11?