new x5 and rattling

[paul1994]

Well I just traded in my 2001 E53 4.4 for my 2010 E70 3.0i. I kind of miss of the power of the 4.4i but I am enjoying the new E70 and hard drive based Idrive system.


After owning the car for awhile i noticed a loose screw sound from the the middle console Every time I stop or accelerate there is a loose screw or something rattling around ( Talking about irritating). I have finally had it. Since my car is out of Warranty I decided to fix this my self of at least investigate to see what the problem was.

After looking around on the forum i ran into a couple of removal guides. Here is mine.



Here is were i pried the plastic trim off with my screw driver.



After removing the trim with the idrive knob attached there where 5 screws (T30) i removed to get to where the noise was.



Removal of the 5 screws and lifting the shifter out




After the shifter out I saw the problem a coin has rolled into a groove. The flashlight is pointhing to where the coin was.



The shiny object in the middle is the penny


to get to the coin i put a piece of tape around my finger and fished it out. Here is the pic with the penny stuck to the tape.




Boy this was a pian but it was easy enought to do. The one thing that stood out to me since I have the newer idrive system is that i did not need to remove the knob, other that that it was a piece of cake.

I hope this helps someone else out.