|
|
|
|
||||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
04-04-2006, 06:46 PM
|
||||
|
||||
Cd changer installation ??
So far I have CD changer ( BMW) part # 8211 0 028 760 made 2002 August, 12 v negateveGND ( 6 pin, ans 3 pin )and ( actually Coaxial inn, but I do not have a coaxial cable connection in X5 2003 ,DSP radio-tape player ??) thank you ! 
|
| Sponsored Links | |
|
|
|
|
#2
04-04-2006, 07:26 PM
|
||||
|
||||
|
You can, but in my opinion you don't need to disconnect the battery to do this.
For a 2003 you likely have the analog DSP system that no longer uses the coax connection between the CD changer and the DSP amp. If you connect up the 3 pin and 6 pin connectors and have sound then you are good to go.
__________________
 Xoutpost.com - where you come for the information but stay for the friendships
|
|
#3
04-04-2006, 08:07 PM
|
||||
|
||||
|
Just remove the fuse. I've installed a new changer few weeks ago. I did not know that I needed to remove the fuse, so it burned out. But I bought a new one and put it on it's place after conecting the power cable.
|
|
#4
04-04-2006, 08:31 PM
|
||||
|
||||
thanks..good to know
I remooved fuzes, Connected CD changer, next step ...put fuzes back . and............. screen does not see this CD changer ( more correct it shows there is no CD !) .What it could be ?I tryed to remoove the book with CD's from Cd changer and it is not coming out ..my guess CD changer does not functioning normally..But I can hear some electrical juse is circulating inside this CDhanger too....Could it be other problems ??
Part 2. I sent CD changer to shop ( diagnostic and fixation ) will be back in a week with my next step.(apr.9,06) friendly Still in the shop 4/20/06 !! Last edited by dzhoka; 04-20-2006 at 03:05 PM.
|
|
| Bookmarks |
|
|
|
|
Linear Mode
