|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Hi Eric,
I'm using the intravee in an m3, I'm sure I've seen some pics somewhere of an x5 install, but can't remember where. I think you may have more options as you may have more space. I didn't install the CD changer, so used the space to hold the ipod, and the serial lead for the intravee, and the usb lead for the resler. I don't think you'd get the intravee,kca420i and an ipod in the tray. You don't need the resler to be attached all the time when using navcoder, I just did it to make it easier if I wanted to use it again. Once navcoder has changed settings they remain. I've activated the voice control and TV in motion. The voice control is not a feature of the intravee, its included on some bluetooth modules, but not enabled. The resler & navcoder let you enable it, if its installed. Its an excellent option, letting you operate the phone, sat nav and record memos. The voice phonebook is separate from the phone's phone book, so if you have a phone which has problems with phonebook syncing, you can use the voice phonebook. |
|
#2
|
|||
|
|||
|
Hello Paul,
I you find these install pics again please send me the link. Have been Googling quite some time but couldn't find it for the X5. There's quite some space available in the trunk on the floor behind the tray where the cd-changer used to be. The iPod + KCA-420i might fit there. The non-MP3 cd changer was removed as I would have needed another 2 Alpine devices to use it ($$) with the iPod and with 40GB of music there's no need for cd's anymore. Will probably install a connector to attach the Resler interface in the same area the way you did. Wrote down the part numbers you mentioned and will order them soon. Did you put the Resler interface in an enclosure? How do you know whether the bluetooth module has voice control? Almost bought a voice control module but wasn't sure whether it was the correct part number for car with serial number LV48554. It didn't match the one I found on realoem.com and I heard there could be an issue with the BT module. Gr. Eric |
|
#3
|
|||
|
|||
|
Hi Eric,
I wrapped the resler in the insulation material I took off the CD changer leads as my car never had a CD changer installed. Probablly not the best solution, a small plastic enclosure would be better. I don't know which bluetooth modules have voice control, I just risked buying everything and it paid off! My car is a september 2005, but I don't know if all cars after that date had the option, or it just depended on what part they had in at the time. |
|
#4
|
|||
|
|||
|
Mine is 01-2004 (LV48554) and it came with option 644.
Will try once Mr. Resler has sent me the interfaces. Can't wait to change the start-up picture on the nav display.. |
![]() |
| Bookmarks |
|
|
|
|