Dice with 120GB ipod

[captx5]

Does anyone have a Dice silverline integration kit installed with a 120GB ipod classic and the setup works???

I installed the Dice silverline kit with a 120GB ipod classic in my 2004 X5, analog DSP and nav system. No text display, no steering wheel controls unless I set the Dice dip switch for the car to "old business cd or cassette" setting. With this setting I can control the ipod

If anyone has this combination and it works, please share your dip swith settings and any other tips. Thanks.

I contacted dice electronics support three days ago and am still waiting foe a response!!!

I notice in the Dice literature they mention a 80GB and 160GB ipod, but no 120GB ipod??? What gives??

[Tom G.]

Originally Posted by captx5

Does anyone have a Dice silverline integration kit installed with a 120GB ipod classic and the setup works???

I installed the Dice silverline kit with a 120GB ipod classic in my 2004 X5, analog DSP and nav system. No text display, no steering wheel controls unless I set the Dice dip switch for the car to "old business cd or cassette" setting. With this setting I can control the ipod

If anyone has this combination and it works, please share your dip swith settings and any other tips. Thanks.

I contacted dice electronics support three days ago and am still waiting foe a response!!!

I notice in the Dice literature they mention a 80GB and 160GB ipod, but no 120GB ipod??? What gives??

We've tested the kit with the 120GB iPod and it works perfectly. Can you verify your DIP positions are all in the UP settings?

[captx5]

With the DIP positions all UP (default setting), I got sound through the system, but no control form either the steering wheel, radio unit or the IPOD. When I changed the car setting DIP position, I can control selection through the IPOD but no text display on NAV. Volume control works on the steering wheel and radio unit, but I can not select playlist, song or artist except direct from the IPOD. This is the setting I have kept so far, but it is far from adequate.

It was a straight forward install, so I am baffled. Can you suggest anything I should change?

[Tom G.]

Originally Posted by captx5

With the DIP positions all UP (default setting), I got sound through the system, but no control form either the steering wheel, radio unit or the IPOD. When I changed the car setting DIP position, I can control selection through the IPOD but no text display on NAV. Volume control works on the steering wheel and radio unit, but I can not select playlist, song or artist except direct from the IPOD. This is the setting I have kept so far, but it is far from adequate.

It was a straight forward install, so I am baffled. Can you suggest anything I should change?

It sounds like the iPod possibly powered up while connected to the DICE. Some BMWs are a bit temperamental during the initialization process. Perform the following steps:

1. Disconnect iPod from cable
2. Remove battery cables, negative first
3. Touch battery cable terminals together (away from battery) for +5 seconds, a small spark is normal as this is stored power draining from the system.
4. Allow cables to remain disconnected for about 5-7 minutes
5. Reconnect battery cables onto battery, negative last.
6. Reboot iPod by pressing on MENU and CENTER buttons for +5 seconds and then reconnecting to the DICE cable after the reboot process is completed.

Let me know if these steps correct the problem.

[captx5]

Followed your instructions to the letter. It appears to have improved the function control from the Nav and the steering controls, but still no text display.

The display only shows Track no and "Dice". I tried track 2, 4 and 5 under the CD6 setting. Some of the ither info that displayed was Aux 1.04, Core 1.4 and Ipod 1.10. Under the ipod settings menu, software is 2.1.1. No playlists, artists or song names. show on the display and the Ipod control wheel is locked.

Do you have any other suggestions? Thanks for your help so far.

[Tom G.]

Originally Posted by captx5

Followed your instructions to the letter. It appears to have improved the function control from the Nav and the steering controls, but still no text display.

The display only shows Track no and "Dice". I tried track 2, 4 and 5 under the CD6 setting. Some of the ither info that displayed was Aux 1.04, Core 1.4 and Ipod 1.10. Under the ipod settings menu, software is 2.1.1. No playlists, artists or song names. show on the display and the Ipod control wheel is locked.

Do you have any other suggestions? Thanks for your help so far.

Can you confirm the DIP switches on the DICE module are all in the UP positions?

[captx5]

Originally Posted by Tom G.

Can you confirm the DIP switches on the DICE module are all in the UP positions?

Yes, the DIP switches are all in the UP position. Can you tell me how to determine what generation Ipod I have?

[RichardP1]

There is only 1 120Gb iPod, the current Classic (Gen 2 Classic), available in Silver or Black aluminium finish.

[Tom G.]

Originally Posted by captx5

Yes, the DIP switches are all in the UP position. Can you tell me how to determine what generation Ipod I have?

Try using CD6/TRACK6 for text display, remember to return to CD1 afterwards to exit text display settings.

[captx5]

Originally Posted by Tom G.

Try using CD6/TRACK6 for text display, remember to return to CD1 afterwards to exit text display settings.

Sorry for the late response, been having ISP problems recently.
I tried the CD6/Track6 setting and get a text display. Large letters, limited no of characters.

I am wondering if I got a faulty unit, or is something interfering with the unit. I have a retrofitted ULF installed in place of the BMW assist unit that came with the car. There is also a satellite radio unit installed in the car, which I do not use. No other modifications. any further advice would be appreciated.