|
Xoutpost server transfer and maintenance is occurring.... |
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
impossible to change the navboot of my mk3, I have tried in all the ways.
I have read many your posts and I have followed all of your instructions but nothing. I shortly reassume: My mk3 is adjourned to the version 3-1/63, updating done with the software v27. I have tried to change the navboot of the v27 and to burn him/it with (black burning) but nothing, the installation starts and then all jammed it stays. I have tried to declass him/it with the v26 and after having burnt her/it fà the same thing, the installation it starts and then it jams to the first display. I have tried to masterizzare with different speeds, with alchool 120%, with ultraiso, I have wasted 20 cd but nothing. If instead I put the original v27, the installation starts and then it tells me that you/he/she is already adjourned to this version. Do you help me please? |
Sponsored Links | |
|
#2
|
||||
|
||||
@flamex10,
downgrade with the original V.26 and then re-upgrade with V.27. You can't change the Bootlogo for MK3. |
#3
|
|||
|
|||
But I have read that he is able!
I have tried to declass to the 26, but it jams to the first display. I have tried to burn the speed cd lower, but nothing. |
#4
|
||||
|
||||
I think anything higher than v23 is likely to crash an MkIII. Happened to mine and several others before I upgraded to an MkIV.
JV
__________________
JV What gets us into trouble is not what we don't know...it's what we know for sure that just ain't so |
#5
|
|||
|
|||
Latest available version for MK3 was V22 (3-1/63). You have to downgrade and install V22 again.
And don't change the logo in V27.1. You'll have to find your own navboot. |
#6
|
|||
|
|||
Where do I find the v22?
How can I modify the navboot in the mk3? When I burn the cd must I put some particular settaggis, type CD / Xa mode2? Do you tell me, please, dettagliatamente as I must burn him/it? Thanks you are great |
#7
|
||||
|
||||
@Flamex,
Software: http://www.xoutpost.com/articles/all-...ng-system.html Faq "How to install": http://www.xoutpost.com/articles/all-...ystem-faq.html |
#8
|
|||
|
|||
These information I had already read her.
I have performed her, but nothing. My mk3 has the 3/1-63 installed with the cd v27. The strange thing is that it works only that cd, if I make a copy of the same cd and I insert him/it in the nav instead of telling me that there is not a new updating as fà with the original cd, it begins to install him/it and then it jams to the first display. Surely this happens because the scorch is not equal to the original cd, but I don't understand where I am wrong. I have tried to reduce the speed but nothing. Last edited by flamex10; 09-07-2006 at 06:09 PM. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
|