|
||||||||
| Xoutpost server transfer and maintenance is occurring.... |
| Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management |
![]() |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
X5 2006 with TV/Phone no Sat Nav.
Thanks |
| Sponsored Links | |
|
|
|
|
#2
|
||||
|
||||
|
This is a great X5 navigation retrofit write up with parts lists and pictures. That harness in reference #5 is just the trunk adapter that connects the car's main wiring harness to the nav computer.
http://www.xoutpost.com/articles/all-...system-x5.html The major parts are the MK3 (which you already have), the display screen, the main navigation wiring harness, and a Board Monitor radio module. Then, you will need a bunch of little parts like brackets, screws, GPS antenna, etc.
__________________
SOLD 2000 E38 750iL Highline Edition, Upgraded with the lastest 2006 X5 Electronics MKIV Navigation, 16:9 Display, Bluetooth, TV/Video with Backup Camera, Sirius, and Aux Input |
|
#3
|
|||
|
|||
|
Thanks Brian great link....do I use navcoder to code it?
Last edited by crows; 01-24-2007 at 08:52 AM. |
|
#4
|
||||
|
||||
|
You may not need to recode, but I would recommend it. Get it turned on and running first, and then make a re-code decision.
If you have DSP, then you probably will need to get your DSP amp recoded. However, Kiwi's nav coder will not code a DSP amp yet, so that will requre a dealer trip.
__________________
SOLD 2000 E38 750iL Highline Edition, Upgraded with the lastest 2006 X5 Electronics MKIV Navigation, 16:9 Display, Bluetooth, TV/Video with Backup Camera, Sirius, and Aux Input |
|
#5
|
|||
|
|||
|
Well I havent received my MK3 as yet but have sucessfully installed my aerial and cabling all ready to go thanks to this site......just one more question? once i plugin the MK3 will the option(navigation) automatically appear on my computer screen? or do I require to code it first?is there any set procedures I need to do.....I did do a search and found lots of install stuff which has helped me but nothing on powering it up.
Thanks |
|
#6
|
|||
|
|||
|
Once you unplug the video lead (blue plug) from TV tuner and into nav unit it'll fire up. Also you have to connect the burgundy plug and the cable from nav to TV tuner
Make sure battery is disconnected when fitting everything. Should work without any problems |
|
#7
|
|||
|
|||
|
The only connectors I have at the end where I plug into the nav unit is a blue, burgundy and aerial connector is this right?hope so all the cable have been run.
Thanks |
|
#8
|
|||
|
|||
|
yeah thats right
|
|
#9
|
|||
|
|||
|
Can a fuse be pulled out? or is the battery the way to go?
|
![]() |
| Bookmarks |
|
|
|
|