help me!! TV MODUL MK2 MONITOR SCREEN

[mbena]

I have a problem:

I have a x5 3.oi years 2000, I want to install the monitors of 4:3 bmw e39, e39 form tv bmw (65508375553) and navigator mk2 sa606 ..

When I connect everything appears on the monitor the inscription:

software laden erforderlich

bitte legen sie eine geeignete

software cd ein


I have the firmware version 21.1 but nothing happens.


I also navcoder interface resler and inpa ediabas ..

From diagnosis inpa, says it is not possible to codify ..

if I go into concession bmw, with the DIS/GT1 is possible to run everything?

THE COMPONENTS

MONITOR 4:3 BMW E38-E39
TV GRAPHICS BMW E39 1998 YEAR
MK2 MONO SA606
BMW X5 30I YEAR 2000 IKE LOW

[Roy in GA]

I was not aware that a 4:3 for an e38 could fit an x5 or vice versa.

[KiwiJochen]

Originally Posted by mbena

I have a problem:

I have a x5 3.oi years 2000, I want to install the monitors of 4:3 bmw e39, e39 form tv bmw (65508375553) and navigator mk2 sa606 ..

When I connect everything appears on the monitor the inscription:

software laden erforderlich

bitte legen sie eine geeignete

software cd ein


I have the firmware version 21.1 but nothing happens.


I also navcoder interface resler and inpa ediabas ..

From diagnosis inpa, says it is not possible to codify ..

if I go into concession bmw, with the DIS/GT1 is possible to run everything?

THE COMPONENTS

MONITOR 4:3 BMW E38-E39
TV GRAPHICS BMW E39 1998 YEAR
MK2 MONO SA606
BMW X5 30I YEAR 2000 IKE LOW

Note the following:

A Mono nav computer cannot drive a colour screen until it has been recoded for colour. This is done by changing the boot mode coding.

A E39 monitor has the wrong viewing angle to be seen easily in a X5.

The IKE LOW cannot deliver the correct information for all of the nav functions.

You need to enable nav as an option in the vehicle options code, but this cannot be done as IKE-LOW and NAV is not a valid combination.

INPA cannot talk to the nav until the operating software is loaded. Without OS, the nav is dumb and cannot talk on the ibus.

You nav is asking for the Operating Software to be loaded. You need to load the softwar. Do so from a new OS disk - get V31 or V32, they all have the same Mk2 OS on them (also the same OS is on V21.1). Make sure the OS disk is error-free and is Mode2/From1 format.

Try cleaning the laser in the nav drive using a normal, commercial, wet-type laser cleaner (CD with special pad that you wetten).

Good luck!

[mbena]

if I buy a mk3 would have the same problem..

tanks!!