monitor problems - Page 2

gonch69 · #11 04-27-2010, 03:58 PM

when i disconnected the nav unit i still had the menu just no gps option

(Don't forget, nav takes 60 seconds from last door closing/opening to turn off. ) does this go for the boot lid too.

one other thing is the time on the trip compu not holding time do you think this is linked as it happened at same time so not sure what holds the clock memory this could be the problem

as when i put the fuse number 41 back in you hear a clicking noise from behind dash

Sponsored Links

gonch69 · #12 04-29-2010, 02:28 PM

not sure if anyone knows what holds the clock memory for the monitor and cluster clock becouse these wont hold the time so think this has something to do with it

19. The radio, sunroof, and other "ignition" triggered accessories are available for a period of time after the car is turned off until a door is opened.
20. The fact that the car goes into "sleep" mode after 16 minutes of inactivity to reduce battery drain and eliminate dead batteries from "left on" accessories (lights, etc).

plus does anyone know how to set up 19 and shouldnt 20 stop my batt going flat?

big bob · #13 04-29-2010, 03:32 PM

I think the clock is stored in the instrument cluster. Jochen might know.

gonch69 · #14 04-29-2010, 03:39 PM

would make sense might be some kind of relay thats gone

big bob · #15 04-29-2010, 03:49 PM

It's too difficult to diagnose without finding out if it is the tv, the radio, the gps or the cluster by unplugging each one in turn.

gonch69 · #16 04-29-2010, 04:08 PM

gonna try this next and see if it works

Instructions to access the hidden OBC functions:
1. Hold Trip Reset while turning ignition key to on position
2. OBC should show "Test"
3. Use Trip Reset to select function 19.0 that unlocks all the features
3. Wait for display to show "Off"
4. Depress Trip Reset for 1/4 second and release it
5. With no delay press Trip Reset several times to select one of the following function s

21 Software Reset; reset OBC settings
00 End of test

big bob · #17 04-29-2010, 04:18 PM

OK. Come back and report after you have done that. It won't fix your problem though. There is no "flatten the battery with the TV" setting to reset.

gonch69 · #18 04-30-2010, 04:36 PM

tried the odb software reset it went of but as soon as turned on ign then off again same thing radio goes of monitor stays on

gonch69 · #19 05-01-2010, 02:59 PM

all sorted now thank god it was something silly that i kept over looking doh

the fault was a blown fuse to the instrument cluster which must of been the live feed to theclock but becouse it blew it must of sent the power to the monitor

thank you for all your help and hope this may one day help somone else out

Sponsored Links