DIY on replacing fog lamp bulbs on a BMW X5
Contributed by: TQ2K
<table border="0" width="640"><tbody><tr><td width="100%"> Source: http://www.tayam.com/x5/hidinstall.htm </td></tr><tr><td width="100%">Note: 2000 - 2002 X5's use H3 or H1 bulbs (verify yours before buying). 2003 X5's use H11 bulbs. This DIY utilizes the PIAA H3 Super Plasma Tools required: Phillips Screwdriver Total time: 2mins. Cost: $68.50 (incl. shipping) from www.autobulbdepot.com Before installation of Driver side HID Bulb for Fog Lights http://www.bmwmotorsports.org/crew/u...bsDSC00813.JPG 1. Remove (carefully pull out) plastic cover. http://www.bmwmotorsports.org/crew/u...bsDSC00816.JPG 2. Pull out (in upward motion to release clip) after unscrewing two screws at the bottom of the light housing. http://www.bmwmotorsports.org/crew/u...bsDSC00817.JPG 3. Take out whole light housing then remove cable. http://www.bmwmotorsports.org/crew/u...bsDSC00818.JPG After installation of Driver side HID Bulb for Fog Lights http://www.bmwmotorsports.org/crew/u...bsDSC00828.JPG OEM Fog lighthttp://www.bmwmotorsports.org/crew/u...bsDSC00827.JPG After installation of Driver side HID Bulb for Fog Lights http://www.bmwmotorsports.org/crew/u...bsDSC00826.JPG After installation of Driver side HID Bulb for Fog Lights http://www.bmwmotorsports.org/crew/u...bsDSC00825.JPG Before installation of Driver side HID Bulb for Fog Lights http://www.bmwmotorsports.org/crew/u...bsDSC00814.JPG After installation of Driver side HID Bulb for Fog Lights http://www.bmwmotorsports.org/crew/u...bsDSC00820.JPG After installation of Driver side HID Bulb for Fog Lights http://www.bmwmotorsports.org/crew/u...bsDSC00830.JPG Additional tips on removal of fog light housing at http://www.xoutpost.com/x5-e53-forum/...ghts-pics.html |
All times are GMT -4. The time now is 09:53 AM. |
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.