Got E30 a new head light..but...
 

Okay... I got HID/Angel light head light set for my 325is, but after my brother in law and we installed the head light... we got problems... here are the pix

what do i connect to High/low beams?? and on those wires connect to angel lights, has a black input and on the manual says to the position light of car body harness... where I connect it? and what are those two wires do? the one w. brown and yellow wires...

thx:dunno:

If you haven't done so yet, and haven't figured out the lighting issue, go sign up at http://forums.bimmerforums.com/forum. They have a whole lighting and electrical section. Surely someone in there can help if no one here can.

What year is you 325is? You may have to cut the factory harness and solder in the 9006 harness to connect to your lights. As for the angel eyes, you will have to tap into your parking lights (side marker lights on the bumper will do) to power up the angel eyes.

Daniel

89, nope, angel light is straight to the battery... that wire w/ relay and fuse connect to everything, I dont think I need to cut factory wires, my problem is... what I connect to High/low beams? and there is another input on those wires that I don't know connect to where:dunno:

I had a 1986 325es that I retrofitted some Bosch euro smileys into (with a xenon kit). I had to hack the wiring harness and solder in some 9006 connectors.

As mentioned before, check www.bimmerforums.com or www.r3vlimited.com

Dan