Home Forums Articles How To's FAQ Register
Go Back   Xoutpost.com > Miscellaneous > Submit an Article
Arnott
User Name
Password
Member List Premier Membership Search Today's Posts Mark Forums Read

Xoutpost server transfer and maintenance is occurring....
Xoutpost is currently undergoing a planned server migration.... stay tuned for new developments.... sincerely, the management


Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 01-25-2008, 06:35 PM
Bimmer360's Avatar
Member
 
Join Date: Nov 2006
Location: Denver, CO
Posts: 1,594
Bimmer360 is on a distinguished road
SP Replacement DIY

Spark Plug Replacement DIY
by Ernest aka Bimmer360


Disclaimer:
Bimmer360 is not responsible or liable for any damage of any property or injury resulted in performing this DIY. It is highly recommended to implement safety procedures at all times.


Vehicle Info:
2001 BMW X5 4.4i V8

Tools/Materials needed:
Spark Plug Socket
6” or longer extension
8 Spark Plugs (for V8 4.4i)
Anti-seize compound
Flat Head Screwdriver
Set of sockets

Step 1: Remove the center engine cover by unscrewing 4 hex bolts using an allen wrench. Once they’re loose, lift the cover up.

Step 2: Remove the 2 side covers (says BMW) that hides the coil heads by removing the screws using a socket. There are 2 on each side. The 2 that are farther has a cover. Gently pry it using a flathead screwdriver or any prying tools and remove the screws inside.



Step 3: Once all the 3 covers are removed. You should see all the coil heads exposed as shown below.



You will need to remove the connector on each head by unlocking the silver clip. To do so, you will need to hold on both sides of the clip and pull it out towards the directions of the arrow below.



Step 4: Each coil heads has 2 hex nut on each side that holds them. Unscrew them using a socket. I have the 4.4i X5 V8 so it has 8 coils with 2 hex nuts on each so i have 16 total.

IMPORTANT: Facing the engine on the right, the 3rd coil has 2 ring terminal connected with the hex nut, and on the left side of the engine, the 2nd coil has them, so make sure you put them back once you're ready to tigthen the nuts back.



Step 5: Once all the screws and all the connectors have been removed gently pull the coils out to expose the spark plug inside the hole.



Step 6: Using a spark plug socket and a 6” inch extension, Place it down into the hole where the coil came out of. Twist it until you can press it down on the spark plug. You will hear a pop/click. You can now loosen the spark plug.

Step 7: Get the new plugs (i purchased BOSCH PLATINUM) and apply an Anti-seize compound around the threaded area to avoid seize and corrosion.






Step 8: Place the new spark plug inside the socket and place it down the hole. Firmly press the coil back onto the plug, and then re-attach the connector. Lock it by pushing the silver clip and screw all the nuts back to tighten them. Do the same steps for the rest of the spark plugs and coils.

IMPORTANT: Virtually every fastener or threaded connection on our BMW X5 has a torque spec assigned to it including spark plugs. Please refer to any legitimate source for specs.

Step 9: Finally, reinstall everything using in reverse order. Start engine and make sure it works.
__________________
Bimmer360
Space Gray X
My Mod Page
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On





All times are GMT -4. The time now is 09:29 AM.
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd. SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved. Xoutpost.com is a private enthusiast site not associated with BMW AG.
The BMW name, marks, M stripe logo, and Roundel logo as well as X3, X5 and X6 designations used in the pages of this Web Site are the property of BMW AG.
This web site is not sponsored or affiliated in any way with BMW AG or any of its subsidiaries.