Business CD Removal
 

Ok, I'm installing my new IceLink Plus, and I need to remove the Business CD to make the connection in the back of the radio, but I can't figure out how to remove it?!? I saw the article on installing the IceLink, but when I pull off the volume knob, there is no "small grub screw" underneath. How do I get the darn thing out?:mad:

Once you pull the volume know out; there is a small hole for a torx screw. You turn it counter clockwise to pull it out. Then there will be two torx screws that need to be loosened thats visible once you disconnect the MID.

Here is the link to an article explaining how to remove the cd, it is very easy.I did my Aux input last week.

http://www.xoutpost.com/articles/x5/s...bluetooth.html

Does this help
 

You are working on X3 with Business CD? Attached a few documents that might help :goodluck:

- p

Now this should do the trick! Thanks!

Why is there a need to remove the business cd to connect it to the back ??? when you can use the CD Changer cables located in the center bucket or am i wrong ?

Thanks

Depends on where the kit was purchased. Overseas kits used the R40 Quadlock harness, while the US kits used a different CD Changer harness.