Is a lower crossover better or a higher crossover?
It goes from 50hz to 120hz. I have it set on the middle. I read somewhere that lower is better for better SQ (below 80?)
If you have a basslink what settings do you use?
The bass boost I turned it up a little more than 1/2 and it did improve the bass response, but it sounded kind of muddy, but I also turned up the crossover a little too.
Just making sure, is the basslink supposed to be louder than my speakers? Maybe it is just the type of music I listen to. I listen to 99.9%
vocal trance (future trance albums, dream dance albums, etc). The .1% of the time I listen to hip-hop/rap some of the songs really kick and I like that feeling. That's sort of what I'm expecting all the time I guess. Possibly even more.
-Yes, the problem with my Basslink was the wiring. I had the original 8gauge wire, but it wasn't cut. I cut a good 15 feet off of it. It improved 80% but it was still cutting out at very high volumes so the only thing I could think of was to solder the wires tapping into the factory system. That solved the problem. The basslink is in the trunk next to the factory amp standing up. I have to unscrew the basslink now to reach the factory amp area.
I was thinking of upgrading to this:
http://www.crutchfield.com/S-vnysvEy...1000&I=500PLV7
maybe that's more what I'm looking for?