Help:Dice install w/DSP
 

I trying to install my Dice unit w/ DSP converter.

I need to find a 12V switched circuit for the DSP converter.

Any idea where can I find a switch 12V in the back ?

I have only found constant 12V.

Thanks in advance

Look for a purple wire with a white stripe - this will be your +12V switched power source. This will typically be found on the telephone wiring bundle in the cargo area.

15 pin connector to the DSP amplifier has a white wire in the middle. That is your switched power.

Doug

It's best to stay away from any amplifier wiring as they are quite expensive to replace if something goes wrong. There is a purple wire with a white stripe in the telephone bundle next to the amp, this can be used for +12V power.