|
cd changer wiring instructions
hello,
i need to conect the cd changer to the nav system. my problem is that my car did not have any wires at all so i must make the connections all by me. does any one know where the 2 wires from the cd changer go? i mean the 6 pin and the bigger one where must be connected? i have the 16:9 screen and the bm54 radio if this could help thanks |
2 Attachment(s)
You'll have better luck with pics. Here are the connectors I have:
Attachment 21138 The connection on the left is the bigger of the 2 plugs. It contains: Black: Right + Signal Yellow: Left + Signal Brown: Common - Signal Purplish: IBus The smaller plug on the right is the power. Red: 12V+ Brown: Ground White: 12V Switched The connections from the left plug go the wire harness on your BM54. I have a BM53 that looks like this: Attachment 21139 In the bottom right of the picture you can see the other end of the signal wires from the CD Changer - black, brown, and yellow. Ibus needs to be spliced into an IBus connection as well. d- |
Quote:
|
Quote:
The CD Changer does have another female receptor Ivisible to the right of the power connections) which will accept a digital coax cable. If you have this cable, it takes the place of the analog (L/R/Ground) connections and connects directly to the amplifier. d- |
Quote:
i mean that except the two cables for the back of the changer ,there is one brown coming out from one of these and it has something like a round pin that must go in the chassis of the car. |
| All times are GMT -4. The time now is 01:57 PM. |
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.