Xoutpost.com - ▀▄ eas | Official DICE SILVERLINE iPod Integration Kit Q/A Thread

Xoutpost.com (https://xoutpost.com/forums.php)

- Mobile Electronics Forum (https://xoutpost.com/electronics/mobile-electronics-forum/)

- - ▀▄ eas | Official DICE SILVERLINE iPod Integration Kit Q/A Thread (https://xoutpost.com/electronics/mobile-electronics-forum/41529-eas-official-dice-silverline-ipod-integration-kit-q-thread.html)

Quote:

Originally Posted by cliff

Hi All,

Just installed my DICE silverline into my '06 X5 with NAV nonDSP.

I can get the screen to work on Track 05 and Track 06, but i can not get it to work on the Track 02. Which means I am down to 8 characters instead of 15 characters.

Has anyone else had this problem and know how to resolve it?

Seems the 15-character display isn't an option, I've forwarded the issue to DICE to see if it can be resolved. We never use it since the font size it too small to see while driving compared to the DISC6/TRACK6 option.

Quote:

Originally Posted by Tom G.

Seems you're asking the same question on 2 separate threads.

I'll forward the issue to DICE's technicians and see if they are looking to change this.

Thanks... appreciate the attention. Didn't mean to come across like a dck...

Quote:

Originally Posted by 930LDR

Thanks... appreciate the attention. Didn't mean to come across like a dck...

Not at all - just making sure we answered all questions. ;)

Tom,

I have 05 DSP, NAV and VSM module so Aux is in use already.
is it still possible to install radio interface dice silverline?

Thanks

Quote:

Originally Posted by wuzin

Tom,

I have 05 DSP, NAV and VSM module so Aux is in use already.
is it still possible to install radio interface dice silverline?

Thanks

You'll need the trunk interface instead since you're equipped with NAV:

DICE - SILVERLINE iPod Integration Kit for X5 00-06 (Trunk Interface)
http://www.europeanautosource.com/pr...oducts_id=1631

Rebooting the Dice Silverline module?

Tom,

My Silverline isn't showing/scrolling text nor does it show the playlist name. It only shows TR 01, TR 02, etc as I use the up or down arrows. I have reset my iPod to no avail.

It has done this before and corrected itself when I started the car after either sitting off for a period of time or overnight. It has been this way for 5 days.

Can you give me the steps to resetting the Silverline module?

Thanks.

Quote:

Originally Posted by Go_Fast

The battery is a bit tough to get to in the X5, since it's under the spare tire. Some BMWs are a bit temperamental during the initialization process. Perform the following steps:

1. Disconnect iPod from cable
2. Remove battery cables, negative first
3. Touch battery cable terminals together (away from battery) for +5 seconds, a small spark is normal as this is stored power draining from the system.
4. Allow cables to remain disconnected for about 5-7 minutes
5. Reconnect battery cables onto battery, negative last.
6. Reboot iPod by pressing on MENU and CENTER buttons for +5 seconds and then reconnecting to the DICE cable after the reboot process is completed.

Let me know if these steps correct the problem, are you on a Business CD or Navigation system?

nav system.

is this the only way to reset the silverline?

wasn't there a procedure to unplug the 3 pin connector with the key in the first position and the ipod either connected or disconnected..??..(i can't remember)

Quote:

Originally Posted by Go_Fast

nav system.

is this the only way to reset the silverline?

wasn't there a procedure to unplug the 3 pin connector with the key in the first poistion and the ipod either connected or disconnected..??..(i can't remember)

No - removing the battery is the proper way to initialize. Otherwise, the system may have compatibility issues down the road.

If you would like us to do it, just make an appointment and stop on by.

by the way, the playlist and artist text is shown correctly on the obc but only tr01, tr02, etc. on the nav screen.