Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   Mobile Electronics Forum (https://xoutpost.com/electronics/mobile-electronics-forum/)
-   -   DICE interference (https://xoutpost.com/electronics/mobile-electronics-forum/47742-dice-interference.html)

gwinder 05-31-2008 07:00 PM

DICE interference
 
I have installed a DICE ipod kit and when I accelerate I get a high pitched whistle/wine. It increases in pitch as the revs get higher. I have tried removing the DICE from it's normal position but it hasn't made a difference. It sounds like my first stereo radio I installed 30 years before I put a suppressors on the spark plugs. Is the unit defector or do I need some kind of suppressor?

Thanks,

Gary

Paul W @ BSW 06-02-2008 05:40 PM

Sounds like a poor ground from your 3-pin power and data cable, I would recommend regrounding it. To do this you will need to take the brown wire on the 3 pin plug coming from the car and connect a new ground wire to the chassis ground the OEM amplifier uses. This should resolve the high pitched whine that your dice module is having.

bd3500 06-03-2008 11:57 AM

I have the same issue and am curious by the last response. If we cut the 3 pin wire and reground the side coming from the car, what do we do with the wire coming from the Dice?

Or should we just cut the wire and reground the side coming from the dice to the amp ground spot?

Thanks

Paul W @ BSW 06-03-2008 03:45 PM

Quote:

Originally Posted by bd3500
I have the same issue and am curious by the last response. If we cut the 3 pin wire and reground the side coming from the car, what do we do with the wire coming from the Dice?

Or should we just cut the wire and reground the side coming from the dice to the amp ground spot?

Thanks

You shouldn't have to cut it, just splice in a wire and run it to the chassis ground for the OEM amplifier. I didn't say cut the ground wire, but if you do you would want to ground the dice side of the cut ground wire. Let me know if you have any other questions and I'll be happy to help.

Tom G. 06-10-2008 04:53 PM

Quote:

Originally Posted by bd3500
I have the same issue and am curious by the last response. If we cut the 3 pin wire and reground the side coming from the car, what do we do with the wire coming from the Dice?

Or should we just cut the wire and reground the side coming from the dice to the amp ground spot?

Thanks

Try rerouting the cable beforehand, avoiding any power lines or signal cables. Otherwise, a radio-interface harness will shorten the cable length and minimize any chance of EFI.


All times are GMT -4. The time now is 11:11 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.