Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   Mobile Electronics Forum (https://xoutpost.com/electronics/mobile-electronics-forum/)
-   -   Subwoofer (https://xoutpost.com/electronics/mobile-electronics-forum/5155-subwoofer.html)

broknlgs24 09-15-2005 01:55 PM

Quote:

Originally Posted by statdoc
Would it be better to have the sub mounted in the driver's side area, so it doesn't rattle the fuel door?

a little electrical tape will keep the gas door from rattling. :thumbup:

ekaz 09-15-2005 02:00 PM

I have the back of my X5 apart right now anyway so I'll do some research tonight as well.

carlos3679 09-15-2005 02:03 PM

Quote:

Originally Posted by broknlgs24
a little electrical tape will keep the gas door from rattling. :thumbup:

LOL

statdoc 09-15-2005 02:08 PM

1 Attachment(s)
Quote:

Originally Posted by broknlgs24
a little electrical tape will keep the gas door from rattling. :thumbup:

Like this??

broknlgs24 09-15-2005 02:21 PM

Quote:

Originally Posted by statdoc
Like this??

:rofl: no, not like that. i'm being serious.
inside the fuel door, there are 2 little plastic pieces. take them off and wrap a piece of electrical tape around each of them, then reattach. problem solved. :thumbup:

el_duderino 09-15-2005 02:21 PM

Too many things on the driver's side in too many models for it to be a good plan very often.

Elemental is an internet-only company that has a good reputation. I haven't used them yet, but I ordered a set of these.

dkl 09-15-2005 04:50 PM

Quote:

Originally Posted by statdoc
Would it be better to have the sub mounted in the driver's side area, so it doesn't rattle the fuel door?

It doesn't matter where you mount the sub, fuel door will rattle regardless. My sub is just sitting on the load floor of the cargo area and that rattled the fuel door...and I didn't even turn it up that loud. The electrical tap as suggested DOES work! It was discussed on a separate thread a while back.

broknlgs24 09-15-2005 05:06 PM

Quote:

Originally Posted by dkl
It doesn't matter where you mount the sub, fuel door will rattle regardless. My sub is just sitting on the load floor of the cargo area and that rattled the fuel door...and I didn't even turn it up that loud. The electrical tap as suggested DOES work! It was discussed on a separate thread a while back.

thanks for backing me up on that one. i thought i was losing it. unfortunately, i can't find the thread that talks of the electrical tape. i found 1 thread that i again mentioned it, but i can't find the original thread. :dunno:

jmh 09-18-2005 10:01 AM

Quote:

Originally Posted by dkl
It doesn't matter where you mount the sub, fuel door will rattle regardless. My sub is just sitting on the load floor of the cargo area and that rattled the fuel door...and I didn't even turn it up that loud. The electrical tap as suggested DOES work! It was discussed on a separate thread a while back.

Nope not true :D

There's no rattle whatsoever on my X5 and I think I got an ok system in mine. The fuel door rattle ism most likely coming from the little plastic piece (green colored on mine) which is used to hold the gas filler cap when you are at the gas station. You can simply bend the two metal "strips" the plastic slides into and the rattle will most likely be gone.

Removing rattles is a very time consuming job and takes experience, this is something which seperates the good shops from the others ... :) ....


- Jan

dkl 09-18-2005 02:02 PM

Quote:

Originally Posted by jmh
Nope not true :D

There's no rattle whatsoever on my X5 and I think I got an ok system in mine. The fuel door rattle ism most likely coming from the little plastic piece (green colored on mine) which is used to hold the gas filler cap when you are at the gas station. You can simply bend the two metal "strips" the plastic slides into and the rattle will most likely be gone.

Removing rattles is a very time consuming job and takes experience, this is something which seperates the good shops from the others ... :) ....


- Jan

Yep...those plastic pieces in the fuel door were the exact cause of the rattle. I just used electrical tape to "thicken up" the metal "strips" so the plastics slide in snug...no more rattle from the fuel door after that.


All times are GMT -4. The time now is 03:09 AM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.