|
Intravee II Installation help
4 Attachment(s)
I have an 01 X5 with DSP, no Nav, no CD changer. When I went to connect my Intravee II I find two free iNet connectors but no analog input connector. There is a small coax but it is hooked up to something. I tried unhooking it and the radio still works. Do I need a digital to analog converter? It was so easy in my Z4. There is a small box (antenna?) installed up on the sidewall that has two small coax cables connected to it. I'm not sure what this does. I'm confused.
|
Where does the other end of the coaxial cable shown in the first photo goto? It's not likely to be the cable shown in the 2nd photo.
|
It looks like it goes to the module in the picture on the bottom left. But I can't trace it all the way without taking the side panel off. I did use an Ohm meter between it and the coax in the other picture and they are not the same line.
|
| All times are GMT -4. The time now is 08:26 PM. |
vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.