Modifying IceLink cable for DSP power
 

Some people have asked for clarification of how I modified my IceLink Plus cable to connect the DSP adapter device to the car. Here are a few pictures that hopefully shed light on the subject. This is only for vehicles that require the DSP adapter for proper function of the IceLink (my 2006 X5 did).

http://xoutpost.com/gallery/files/2/8...nkAdapter1.JPG

http://xoutpost.com/gallery/files/2/8...nkAdapter3.JPG

http://xoutpost.com/gallery/files/2/8...nkAdapter4.JPG

http://xoutpost.com/gallery/files/2/8...nkAdapter5.JPG

This post was helpful in installing power to my DSP.
 

I was looking for something like this in the FAQ.

We would prefer a separate power source so you are not pulling power from the ice>Link - you could tap off of a purple wire w/ white stripe in the same area.

Tom, I understand the concern regarding current draw, but the current draw of a CD changer compared to the current draw of Ice->Link and DAC is probably similar. I've been using my configuration detailed in the photos above for almost a year without problem.