Eclipse AVN5435 in 2001 X5
 

Hey everyone, I am trying to install an AVN5435 into my 2001 X5 and don't know how to do the speed pulse connection. I have searched and searched and can't find anything. Does anyone know how to tie into this on a BMW?

Thanks, Jeff

1 / Speaker - Front Left (+)
2 / Speaker - Front Right (+)
3 / Speaker - Rear Left (+)
4 / Telephone Mute
5 / +12v from ignition (ACC and RUN)
6 / Speaker - Rear Right (+)
7 / DAC - i-bus
8 / Speaker - Front Left (-)
9 / Back Up (?) (terminal 30 - Fuse F56)
10 / GAL - speed signal
11 / Speaker Front Right (-)
12 / Speaker Rear Left (-)
13 / Nighttime Illumination Signal
14 / Speaker Rear Right (-)
15 / Ground
16 / Auto Antenna - diversity
17 / Not Used (LAC)

I got this form the radio pin outs in the radio section on the home page. Has anyone used:

9 for Backup signal
10 for speed signal

And if they have signal from the factory on a build date of 11/2000?

Very easy if your 01 is the same as my 00. I'm almost positive that its a black/white wire. The wire can be found from one of the harness behind the headunit. Let me know and I will pull out my headunit and take a closer look. Rob

Don't go and pull anything apart, but do you remember if it was in the main radio harness?

I'm not sure It's in main harness but it's one of the connects behind the radio. If you get stuck let me and I'll pull it out, it's not a big deal.

Thanks Rob.