Reverse Camera Wiring - Solution
1 Attachment(s)
Having read all manner of solutions to wiring up a reverse camera and having decided on my own solution, I thought I'd upload the wiring diagram for anyone thinking about doing this....it really is very simple.
This solution assumes you have Nav but not the RCA feeds in, so connects directly into the Nav loom. I chose this method to ensure a 'clean' earth and positive Hope this is helpful |
Hi there,
Looks fairly easy. Just a couple of questions from a thicky!! 1. Any part no. for the relay or can I go into a car radio shop and ask for one? 2. where are the blue and white connectors to be found? Regards, Lez Taylor |
Hi
I got my relay from Maplin...part number N00AW. This is a 12v 30Amp SPNO relay The blue and white connections are connected to the TV module which is next to the battery (under the black plastic cover which is under the metal dome which is under the spare wheel in the boot). If you have a TV module, as you remove the plastic cover, you'll see the Nav computer on the left and the TV module on the right. If you don't have a TV module, the cables should be wrapped down there somewhere. The white connector may have a thin white loose wire cable tied to it (at least mine did)...not sure what this spare cable is for but at least you can use it to identify the white plug |
Oh s..t,
I had an lpg conversion done and the tank is is the spare wheel cavern, I guess i'll have to go burrowing. Many thanks for the info I am going to give it a go. Regards, Lez |
All times are GMT -4. The time now is 11:11 PM. |
vBulletin, Copyright 2024, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.