Xoutpost.com
Page 2 of 3 1 2 3
Show 200 post(s) from this thread on one page

Xoutpost.com (https://xoutpost.com/forums.php)
-   Navigation System (https://xoutpost.com/electronics/navigation-system/)
-   -   Wont load software (https://xoutpost.com/electronics/navigation-system/25305-wont-load-software.html)

mr brown 01-09-2007 12:12 AM
went and got new cd-r's and still wont load.....

KiwiJochen 01-09-2007 01:14 AM
Quote:
Originally Posted by mr brown
Tryied again and again still telling me that cd in navigation uploading??
Verify that your CD is Mode2 - check in Nero InfoTool

mr brown 01-09-2007 02:19 AM
i have tried 3 types of cd-r's... i am not sure if they are mode 2 will imgburn tell me or alcohol 120...

KiwiJochen 01-09-2007 03:54 AM
ImgBurn won't tell you after the CD has been burnt.
Dunno about Alcohol 120?

Use ImgBurn to open the image file on yr PC - it'll show then if it's Mode1 or Mode2

mr brown 01-09-2007 10:04 PM
still wont go???? Also if anyone has v16.2 I would like to try that because im currently at v16...

KiwiJochen 01-10-2007 03:58 AM
Describe a bit more what goes wrong.

Does the nav recognise the CD-ROM is inserted and commence the upgrade procedure?
Are you waiting long enough? You need to wait up to 6min
Are you keeping the ignition turned on the whole time? First position (radio on) is sufficient
Did you do a verify after you burnt the disc? You should get minimal errors - I tend to get around 10 errors, which has always been OK. If you get hundreds, suspect a bad CD-R
Have you tried different CD-R media? Sometimes the cheap CD-Rs work better than the expensive ones.
Make sure you have aKey CD on hand. If you upgrade >v17, it will ask for a key CD. Note that Key CD image is not readable on a PC.

mr brown 01-10-2007 09:55 PM
I have wated atleats a half hour all it does is tell me it is loading software and thats it???? do i have to take it in and hook up something to the ecu to get it to load???
Quote:
Originally Posted by KiwiJochen
Describe a bit more what goes wrong.

Does the nav recognise the CD-ROM is inserted and commence the upgrade procedure?
Are you waiting long enough? You need to wait up to 6min
Are you keeping the ignition turned on the whole time? First position (radio on) is sufficient
Did you do a verify after you burnt the disc? You should get minimal errors - I tend to get around 10 errors, which has always been OK. If you get hundreds, suspect a bad CD-R
Have you tried different CD-R media? Sometimes the cheap CD-Rs work better than the expensive ones.
Make sure you have aKey CD on hand. If you upgrade >v17, it will ask for a key CD. Note that Key CD image is not readable on a PC.

rahbaranp 01-11-2007 04:18 AM
I have the same problem the screen shows that software will be loaded but doesn’t do anything, also I went to bmw dealer and they couldn't fix it for me

ncx 01-11-2007 09:29 AM
mr brown, did you get it going? Have you tried a hard reset on the nav drive - ie pull power? Was wondering if the mode 2 helped you.

mr brown 01-11-2007 09:36 AM
Quote:
Originally Posted by ncx
mr brown, did you get it going? Have you tried a hard reset on the nav drive - ie pull power? Was wondering if the mode 2 helped you.
Yes pulled power did mode 2.. I think I have to take it to the dealer to make it update via hooking it up to thier computer since the software in it now is so old.. Sound about right???


All times are GMT -4. The time now is 06:12 PM.
Page 2 of 3 1 2 3
Show 200 post(s) from this thread on one page

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.