ETA not working
 

Using MK4 DVD nav with 2007-1 map and v29 firmware

The estimated time of arrival on our screen does not work. It used to before I upgraded to v29 from v28 and it just displays _ _ : _ _ now.

The clock is set OK on the computer and I'm sure this is a simple fix, but a quick search found nothing on the subject.

Can anyone help?

Cheers, Matt :)

Your coding settings have been lost. You need to reprogram the nav to restore them,
Use my NavCoder app.
If you have an X5, you need to check the 'Show arrival time' box to set that coding option.

Easy fix.

It's in an e39. I use the PA soft 1.36 scanner which connects via the OBD II port. Would resetting the nav system solve the problem?

Doubt it. You need tocheck the current nav coding - can you do that in PA Soft? And then you need to re-code if necessary.

My NavCoder does it easily.

I had the same problem a few weeks ago. On V29.1, too. I downgrade to v28 and update to v29.1 again.
It solve the problem.

But don't ask why. :rolleyes:

Thanks for the tip, Facelift - worked a treat.

I've got the same problem but i dont have a v28 or v29 disk..dealer did it for me. any suggestions on how to sovle the ETA issue?

Use my NavCoder to correctly program the settings, it's an easy fix

sounds a bit complicated though...i'm not that tech savvy

In that case, you should go straight to your BMW dealer and ask them to fix it for you.