Power led light is not going out mk4 mk3
 

Hello Guys,
i've got an question my power led light from my mk4 navigation computer is not going out, can somebody tel me why it not go's out??

Some mk3 navigation computers have the same problem, have any of you a solution for that problem, my accu is going empty, please help.

regards

The Mk4 shuts down power after 60s of databus inactivity.
Databus inactivity occurs when the ign is off, all doors and windows and sunroof are closed, and the car is left alone.

You can observe this by leaving the boot open, and shutting elverthing else and locking the car. Use a stopwatch. Around 60s to 70s after the car is locked the Mk4 will shut down.

If it doesn't it indicates you have ongoing databus activity, you would need to monitor the databus to see what device is not shutting down (it may well be another device which is the issue)

I tray it but the mk4 is not going out, even in a another car is the power LED on. nobody with this problem??

Can i see it with navcoder?? wich device is not shutting off??

regards

It is not alive...... I think you even do not have GPS-Navigation in your menu...... In this case NavCoder will not see your navi as well.....

note; Mk4 is working very well in the car everthing is normal only the power led is not going out, even after 3 hours.
Doors close, and wait wait but Power LED is still on.
Some mk3 have the same problem. I wan't to now why the LED keeps going on and not schutt off.

Sw version = 4-1-00 the new one V31.

Please have somebody and solution??

regards

Sorry I did not understand you correctly.....

Means you navi does not goes to sleep mode, right? Short circuit somewhere.....

yes exactly, it is not going to sleep mode.

I've got another mk4 that one is going to sleep after 100 sec, this one don't want to go sleep. I wan't to now why??

Power Led is on. it is not the car wiring, because they another one is going to sleep, problem is the mk4, but what??

regards

Did you try a total wipe of the SW and then a reload?

To totally re-write the flash memory, you must

1. Load V21 or earlier. This has a different memory map, will force a total re-write.

2. Then try it!

3. Then load V31 and try it.

This sequence will delete ALL settings - all address book entries, all coding, everything. Maybe it will help you.

If that doesn't help, read the nav diagnostic info using NavCoder and see if there is anything unusual...

ok i will ty it than i will progress you all.

were can i download direct V21 or earlier??
please a link were i can download direct V21 o earlier.

regards