Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   Navigation System (https://xoutpost.com/electronics/navigation-system/)
-   -   OEM Ipod adapter to IPod\Iphone Cable Pinout (https://xoutpost.com/electronics/navigation-system/71596-oem-ipod-adapter-ipod-iphone-cable-pinout.html)

wsramahi 03-26-2010 02:11 AM

OEM Ipod adapter to IPod\Iphone Cable Pinout
 
Hello,

I got an OEM Ipod interface adapter from scrap and it was fitted in X3 2008, the adapter HW is 3.0 and SW is 3.0 and im trying to connect it to my 330i 2003 with MKIV and cd changer

i maneged to find the installation document and the owners manual but the main problem im facing that the retrofit is missing the IPod connector located in the glove box, so idid alot of search on the internet and it appears the name of the connector is 8-pin Din connector

but i couldnt find the pinout or diagram or any diy , can any one plz help!!

wsramahi 03-26-2010 06:54 AM

this is what ive found so far for the glove box cable!!
http://img228.imageshack.us/img228/5426/cbpa14.jpg
and the pinouts is
http://img532.imageshack.us/img532/5661/8pindin.png
but when i tried to test the cable compatability i just checked the ground pin no 5 and was different!
the adapter pin no 5 in not used!!
can any body confirm plz?

X5 Meister 03-26-2010 08:57 PM

What's the p/n of the cable you've got or better yet, what's the p/n of the kit from which it came?

wsramahi 03-27-2010 04:57 AM

Thx 4 reply the kit I have is missing the iPod cable and the p/n is
65 11 0 035 962 sw 3.0 hw3.0 I beleave this cable comes standard 4 all iPod enterfaces and from the iPod pinout sources I found they say there should a spacific resistor 500oh on the cable it self for enabling the serial communication between iPod and the adapter also a 12v suply wire should be connected

sadly I still need the pinout diagram hopping someone have it and share this info

X5 Meister 03-27-2010 05:48 AM

If the installation instructions don't have the pinout then I don't know how you are going to get them. BTW, the kit is not compatible with a CD changer keep in mind. There are 2 cables in the kit, and the instructions list them both. Why don't you just order the missing cable from the dealer?

wsramahi 03-27-2010 09:51 AM

The installation document only have the pin out for the radio unit and I did called the dealer and the price 4 the cable alone is 95$ !! I think I should rename the dealer to stealer!
Quote:

BTW, the kit is not compatible with a CD changer keep in mind
you mean I'll replace the changer with this unit right?


All times are GMT -4. The time now is 08:06 PM.

vBulletin, Copyright 2024, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.