Xoutpost.com

Xoutpost.com (https://xoutpost.com/forums.php)
-   Navigation System (https://xoutpost.com/electronics/navigation-system/)
-   -   Looking for help coding (https://xoutpost.com/electronics/navigation-system/76684-looking-help-coding.html)

hpy540 10-26-2010 11:15 AM

Looking for help coding
 
I am looking for some help if anyone in the upper midwest that has a GTI/DIS OR NCSexpert or autologic interface tool. I have a car than needs the airbag module reset and the Nave coded to the car and the wheel coded to the car with heater controlls and radio. The radio worked before I replaced it with the correct one. it is a 2001 e39 M5 with 62k on the clock. Someone whored it up and put a x5 wheel in it and stole the m wheel. they also stole the heater controls. I am in WI but would be willing to travel as long as i do not have to go to a dealer. can anyone help me here?

Please email me and i will call you back [email protected]

oh yes i have the original Mk2 in the M5 and i replaced the one in my 2001 540 with a mk4 unit. i want to put the mk4 in the M and put the mk2 in the 540.

I have orderd a ibus interface and as soon as it gets here i will be poking around in the SW for the car. I will proabably be asking more questions then. BNut i would appreciate any suggestions now.

hpy540 10-29-2010 12:45 PM

Codes & VIN wbsde93481bz97995
Ok Guys any help would be greatly appreciated. If possible can someone also point out locations for the air flap/sensors. Possibly diagrams or other issues with this stuff that they have had. We had cleared these and they came back. All this was done with a x431 launch diag tool and some stuff could not be dealt with. Any and all suggestions welcome.
IHKA automatic heater PN 6916641
Hardware number 60
Software number 63
Diagnosis index 03
Bus 10

Total codes 005
Code 001 0B heat exchanger right
CODE 002 0E REAR COMPARTEMTN POTENTIOMETER
CODE 003 12 EVAPORATOR SENSOR
CODE 004 13 HEAT EXCHANGER SENSOR LEFT
CODE 005 05 FRESH-AIR/RECIRCULATED-AIR FLAP MOTOR

2ND MENUE MFL MULTIFUNCTION STEERIGN WHEEL
BMW PART NUMBER 000000
BMW HARWARE NUMBER 01
SOFTWARE NUMBER 09
DIAGNOSIS INDEX 03
BUS INDEX 78
CODEINDEX 00
DATE OF MANUFACTURE , CW 00
DATE OF MANUFACTURE YEAR , 00

3RD MENUE
ECU IDENTITY
AIRBAG [MRS31 ] SYSTEM
PARTNUMBER 6900
727
HARDWARE NUMBER 40
SOFTWARE NUMBER 30
DIAGNOSIS INDEX 08
CODEING INDEX 10
BUS INDEX 00
DATA 42/00
CODE 001 9 IGNITION CIRCUIT ZK8,FRONT LEFT AIRBAG ITS
CODE 002 11 IGNITION CIRCUIT ZK10 BATTERY UNPLUG 1

MENUE 3 NAV
CODE 001 11 IBUS FAULT
CODE 002 03 PL LINE: SHORT CIRCUIT TO EARTH (AS FAR AS I KNOW I DONOT HAVE ANY BARE WIRES)
CODE 003 01 CONTROL UNIT RESET


hpy540 10-29-2010 12:53 PM

Codes & VIN wbsde93481bz97995
Ok Guys any help would be greatly appreciated. If possible can someone also point out locations for the air flap/sensors. Possibly diagrams or other issues with this stuff that they have had. We had cleared these and they came back. All this was done with a x431 launch diag tool and some stuff could not be dealt with. Any and all suggestions welcome. Right now radio does not work nor the heater

IHKA automatic heater PN 6916641
Hardware number 60
Software number 63
Diagnosis index 03
Bus 10
fficehttp://www.m5board.com/ubb/redface.gifffice" />
Total codes 005
Code 001 0B heat exchanger right
CODE 002 0E REAR COMPARTEMTN POTENTIOMETER
CODE 003 12 EVAPORATOR SENSOR
CODE 004 13 HEAT EXCHANGER SENSOR LEFT
CODE 005 05 FRESH-AIR/RECIRCULATED-AIR FLAP MOTOR

2ND MENUE MFL MULTIFUNCTION STEERIGN WHEEL
BMW PART NUMBER 000000
BMW HARWARE NUMBER 01
SOFTWARE NUMBER 09
DIAGNOSIS INDEX 03
BUS INDEX 78
CODEINDEX 00
DATE OF MANUFACTURE , CW 00
DATE OF MANUFACTURE YEAR , 00

3RD MENUE
ECU IDENTITY
AIRBAG [MRS31 ] SYSTEM
PARTNUMBER 6900
727
HARDWARE NUMBER 40
SOFTWARE NUMBER 30
DIAGNOSIS INDEX 08
CODEING INDEX 10
BUS INDEX 00
DATA 42/00
CODE 001 9 IGNITION CIRCUIT ZK8,FRONT LEFT AIRBAG ITS
CODE 002 11 IGNITION CIRCUIT ZK10 BATTERY UNPLUG 1

MENUE 3 NAV
CODE 001 11 IBUS FAULT
CODE 002 03 PL LINE: SHORT CIRCUIT TO EARTH (AS FAR AS I KNOW I DONOT HAVE ANY BARE WIRES)
CODE 003 01 CONTROL UNIT RESET

vinzer 11-07-2010 10:25 PM

We can help you with coding if you need. We do remote coding.

hpy540 11-07-2010 10:27 PM

how does that work? Do you have aphone number

vinzer 11-07-2010 10:33 PM

Quote:

Originally Posted by hpy540 (Post 780078)
how does that work? Do you have aphone number

[email protected]
Please email us for details.
Thank you

hpy540 11-07-2010 11:19 PM

Hmmm
Quote:

Originally Posted by vinzer (Post 780079)
[email protected]
Please email us for details.
Thank you



All times are GMT -4. The time now is 11:34 PM.

vBulletin, Copyright 2026, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
© 2017 Xoutpost.com. All rights reserved.