Xoutpost.com - Retrofit of the BMW Navigation system in a X5

Contributed by: JPuma 
BMW X5 Nav Retrofit
<hr/> First I would like to thank everyone who helped me pull this off, but
specifically......Chris @ Crevier, you rule!! Parag from <a href="http://www.tvonnav.com">TVonNAV</a>, Moni from
<a href="http://www.navtv.com">Nav-TV</a>, Jeff (UCrewX5) <a href="http://www.xoutpost.com">xoutpost.com</a>. I would also like to thank all these guys for their input: TripleX5, X5Monkey, IFlyX5, TESV12,
HDD3MD and JMDXX5. 
Background: I originally purchased my 01 CPO'd BMW without Navigation. I didn't
think it was much of a big deal not having factory nav since I was familiar with
aftermarket Navigation systems, and I never really saw the BMW Nav system at the
time. I was also told from the dealer that the Navi option was not available on
pre 04 X5's (I'm not kidding). Actually he went on saying the only time you
will see navigation in a BMW is if the vehicle had all the option packages. I
guess he was giving me that "feel good" response that BMW is known
for. After a
few days and some investigating/research I quickly realized I wanted the factory
navigation system. I immediately fell in love with the factory look. You cant
beat how the 16:9 widescreen screen looks in the dash compared to flip-up LCD's
in the dash or a mounted LCD on the dash. I definitely wasn't going to mount
anything on the dash, that's for sure. I also found out that it is not wise to
remove the MID; which is what you would have to do to install a in-dash flip up
LCD Navi system. So that is where my mission begins. 

A few things on SA555: In the manual it says "These installation
instructions are only valid for cars with a SA555 high on-board computer".
Thought the statement is correct, it is not to say that you cant install
navigation in a car with a "low OBC". The SA555 high on-board computer
provides the navigation system with speed, fuel consumption, trip data and date
and time. You will also not have the option in your menu for "AUX Ventilation";
which is a function of the SA555 to set your ventilation system to go on and off
whenever you'd like. In my discovery process I found out that the two wires that
run from the navigation harness to the cluster can be hooked up to the low
cluster as well. The wires are TAA and DFAHL.
These wires exist on the low cluster as well, but hooking them up had no effect.
You can do a cluster upgrade if you'd like. I would suggest the 4.6 cluster
since it has the silver rings around the gauge holes, very nice! I am planning my
own cluster upgrade soon, but for now you can refer <a href="http://www.jeae.dk/E39/Eftermontering/IKE/IKE%206-cylinder_EN.htm">here
</a>for more information. Thanks to Jesper for providing this information.

 
<a href="http://www.bmwmotorsports.org/pdf/nav/X5Nav%20Retrofit%2016-9.pdf">BMW X5 16:9 Retrofit Installation Guide</a>
Parts:

<img border="0" alt="" src="http://www.xoutpost.com/images/articles/58/Retrofit_Parts_List.jpg"/>
 
Some parts are not necessary and some numbers don't exist anymore but all
major parts are in the list. You cannot get the Halter BoardMonitor Oben 65 52 0
138 220. This is an engineering part and cannot be ordered from Germany. This
part is used to mount the brackets for the dash conversion. I had to be creative
and come up an alternative. You'll need some L shaped plastic to replicate the
part or something like it. Review the dash conversion for greater detail. 
Here are some pics of the parts I purchased. I purchased almost all parts new
from <a href="http://bimmer.roadfly.org/bmw/forums/partscounter/" target="_blank">Chris
at Crevier</a>. I purchased the nav harness on eBay but I don't have a picture
for it. It came with the radio connectors cut for the front and rear. This made
the project a bit complicated but Parag from <a href="http://www.tvonnav.com" target="_blank">TVonNAV</a>
came through like a champ. I will get to all that later. I originally bought a
used 02 radio but wound up buying a new 03 to get the AUX inputs option. I will
also be able to add a hands free kit and integrate it with the audio system when
I am ready.  BMW has a retrofit nav harness - BMW wiring harness 

61-12-6-910-148 X5 harness w/DSP.
<a href="http://www.xoutpost.com/images/articles/58/P1010001.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010001_small.JPG" alt="P1010001.jpg (52474 bytes)"/></a>

<a href="http://www.xoutpost.com/images/articles/58/P1010002.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010002_small.JPG" alt="P1010002.jpg (50625 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010003.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010003_small.JPG" alt="P1010003.jpg (52142 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010004.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010004_small.JPG" alt="P1010004.jpg (60766 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010005.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010005_small.JPG" alt="P1010005.jpg (58768 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010006.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010006_small.JPG" alt="P1010006.jpg (68087 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010007.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010007_small.JPG" alt="P1010007.jpg (62231 bytes)"/></a>

<a href="http://www.xoutpost.com/images/articles/58/P1010008.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010008_small.JPG" alt="P1010008.jpg (56656 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010010.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010010_small.JPG" alt="P1010010.jpg (42544 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010025.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010025_small.JPG" alt="P1010025.jpg (44255 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1110033.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010033_small.JPG" alt="P1010033.jpg (35544 bytes)"/></a>
 
Phase 1: Taking the X5 apart
I was able to make PDF's out of most of the <a href="http://www.bmwtis.com" target="_blank">TIS</a>
documents referenced in the installation manual. They are in numeric order here
and not in the disassemble order which they are referenced in the installation manual.

<menu>
 <li><a href="http://www.bmwmotorsports.org/pdf/nav/37%2022%20540.pdf">37 22 540.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/51%2016%20200.pdf">51 16 200.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/51%2016%20204.pdf">51 16 204.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/51%2016%20221.pdf">51 16 221.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/51%2037%20261.pdf">51 37 261.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/51%2043%20075.pdf">51 43 075.pdf</a></li>

<li><a href="http://www.bmwmotorsports.org/pdf/nav/51%2043%20150.pdf">51 43 150.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/51%2043%20251.pdf">51 43 251.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/51%2043%20252.pdf">51 43 252.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/51%2045%20180.pdf">51 45 180.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/51%2045%20181.pdf">51 45 181.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/51%2045%20185.pdf">51 45 185.pdf</a></li>

<li><a href="http://www.bmwmotorsports.org/pdf/nav/51%2046%20050.pdf">51 46 050.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/51%2047%20000.pdf">51 47 000.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/51%2047%20101.pdf">51 47 101.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/51%2047%20172.pdf">51 47 172.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/51%2049%20053.pdf">51 49 053.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/51%2049%20056.pdf">51 49 056.pdf</a></li>

<li><a href="http://www.bmwmotorsports.org/pdf/nav/51%2071%20412.pdf">51 71 412.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/52%2014%20000.pdf">52 14 000.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/52%2026%20005.pdf">52 26 005.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/52%2026%20008.pdf">52 26 008.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/62%2021%20000.pdf">62 21 000.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/63%2031%20023.pdf">63 31 023.pdf</a></li>

<li><a href="http://www.bmwmotorsports.org/pdf/nav/64%2001%20020.pdf">64 01 020.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/64%2011%20749.pdf">64 11 749.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/64%2022%20161.pdf">64 22 161.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/64%2022%20190.pdf">64 22 190.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/65%2011%20030.pdf">65 11 030.pdf</a></li>
<li><a href="http://www.bmwmotorsports.org/pdf/nav/65%2081%20010.pdf">65 81 010.pdf</a></li>

</menu>
Phase 2: Installing the Harness
I kind of rushed into this and didn't take the right pictures. But Ill make
due with what I have. As you can see I have the Nav harness wires already coming
out of the dash. See the cut wires...that's how I got the harness from this guy
on eBay. Don't do like I did, be patient and wait till you get the right parts. Luckily
Parag saved the day by sending me a old style to new style radio adapter. It was
a short cable that had the <a href="http://www.xoutpost.com/images/articles/58/P1010024.jpg"> different connectors</a> on both ends. It is an unknown
BMW part. Probably used by BMW to install the new model radio modules in a old production
model BMW. I used the old style end in the front to
connect the harness to the existing radio harness and the new style plug was
soldered to the cut wires in the rear for the 02 and up radio modules. All the
colors matched up. I also confirmed each connector pin outs, you can find them
here <a href="http://www.bmwmotorsports.org/crew/ucrewx5/images/BMW%20Radio%20Module.jpg">old style</a>, new style. I guess I
would of needed this part even if the wires weren't cut to adapt the nav harness
cable to fit a 02 and up radio module. 
<a href="http://www.xoutpost.com/images/articles/58/P1110034.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010034_small.JPG" alt="P1010034.jpg (62854 bytes)"/></a>

<a href="http://www.xoutpost.com/images/articles/58/P1110017.jpg">

<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010017_small.JPG" alt="P1010017.jpg (555396 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010017.jpg">
</a>
<a href="http://www.xoutpost.com/images/articles/58/P1010018.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010018_small.JPG" alt="P1010018.jpg (31125 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010019.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010019_small.JPG" alt="P1010019.jpg (27546 bytes)"/></a> 
Nav harness install and existing radio connector (Old style round pins)
<a href="http://www.xoutpost.com/images/articles/58/P1110038.jpg">
<img width="100" height="75" border="2" alt="" src="http://www.xoutpost.com/images/articles/58/P1010038_small.JPG"/></a>

<a href="http://www.xoutpost.com/images/articles/58/P1110035.jpg">
<img width="100" height="75" border="2" alt="" src="http://www.xoutpost.com/images/articles/58/P1010035_small.JPG"/></a>

<a href="http://www.xoutpost.com/images/articles/58/P1110037.jpg">
<img width="100" height="75" border="2" alt="" src="http://www.xoutpost.com/images/articles/58/P1010037_small.JPG"/></a>
 
I didn't remove my entire center console like it said in the retrofit install
manual. I didn't see a need two. I did have to unscrew the screws that secured
the rear part of the console to the front part of the console. I was able to
lift the rug enough to see under it when routing the harness wire through. This
is where I wish I had more pictures. As instructed in the install manual I had to
cut the front half of the carpet near the front part of the console on the
drivers side to route the harness underneath it. While I was running the harness
I found the hands free pre wired harness. It was way underneath the rug under
the center console. I moved it somewhere under the console for easy access in
the future. If you're documenting your install, take as many pictures as you can,
It may be helpful in the end. Again, no
pictures of the rear left side...this was a tricky part. It was a PITA to remove
the siding that has the antenna connections under it. I also had to disassemble
the railing for the sliding cover and its aluminum mount. Just take your time in
the back, you'll need it. Make sure you bought extra rivets since you may need
to break some when taking the rear apart. Don't forget pillar clip locks. Not
sure of the name. p/n: 51 43 8 225 567.
<a href="http://www.xoutpost.com/images/articles/58/P1010031.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010031_small.JPG" alt="P1010031.jpg (41196 bytes)"/></a>
This is the two wires that hook up to the
cluster, <a href="http://www.bmwmotorsports.org/crew/ucrewx5/images/speed_signal.jpg"> TAA</a> and <a href="http://www.bmwmotorsports.org/crew/ucrewx5/images/dfahl_signal.jpg"> DFAHL</a>.
If you have a high cluster follow the instructions in the retrofit install
manual, otherwise view the links for each signal to see which wires to hook up
to for the low cluster (A2 in the diagram). I don't have pictures of the wire
hookup to the LCM, follow the manual to complete that hookup.



<a href="http://www.xoutpost.com/images/articles/58/P1010048.jpg">
<img width="100" height="75" border="2" alt="" src="http://www.xoutpost.com/images/articles/58/P1010048_small.JPG"/></a> 
<a href="http://www.xoutpost.com/images/articles/58/P1010050.jpg">
<img width="100" height="75" border="2" alt="" src="http://www.xoutpost.com/images/articles/58/P1010050_small.JPG"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1110051.jpg">
<img width="100" height="75" border="2" alt="" src="http://www.xoutpost.com/images/articles/58/P1010051_small.JPG"/></a> <a href="http://www.xoutpost.com/images/articles/58/P1110044.jpg"><img width="100" height="75" border="2" alt="" src="http://www.xoutpost.com/images/articles/58/P1010044_small.JPG"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1110045.jpg">
<img width="100" height="75" border="2" alt="" src="http://www.xoutpost.com/images/articles/58/P1010045_small.JPG"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1110047.jpg">
<img width="100" height="75" border="2" alt="" src="http://www.xoutpost.com/images/articles/58/P1010047_small.JPG"/></a>   

Continue to the rear with installing the
harness. Hookup your antenna wires, replacing two existing antenna hookups of
the business radio with CD. If you are adding a 02 and up radio module you will
need a antenna adapter for the radio tuner. Contact Parag for this part, or get
the antenna lead from Chris at Crevier. I actually ordered this <a href="http://www.xoutpost.com/images/articles/58/P1010009.jpg">part</a>
(61-12-6-916-315) by mistake and did not use it. When I removed the cover to the
multipurpose compartment I found some existing wires, PDC and something else? 
<a href="http://www.xoutpost.com/images/articles/58/P1010024.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010024_small.JPG" alt="P1010024.jpg (64694 bytes)"/></a>

<a href="http://www.xoutpost.com/images/articles/58/P1010023.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010023_small.JPG" alt="P1010023.jpg (63508 bytes)"/></a> <a href="http://www.xoutpost.com/images/articles/58/P1010028.jpg"><img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010028_small.JPG" alt="P1010028.jpg (41183 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010026.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010026_small.JPG" alt="P1010026.jpg (41473 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010058.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010058_small.JPG" alt="P1010058.jpg (59062 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010030.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010030_small.JPG" alt="P1010030.jpg (35787 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010029.jpg">

<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010029_small.JPG" alt="P1010029.jpg (48132 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010051.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010051_small1.JPG" alt="P1010051.jpg (53494 bytes)"/></a><a href="http://www.xoutpost.com/images/articles/58/P1010060.jpg"><img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010060_small.JPG" alt="P1010060.jpg (46309 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010059.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010059_small.JPG" alt="P1010059.jpg (50848 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010061.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010061_small.JPG" alt="P1010061.jpg (52859 bytes)"/></a>
You can skip this part if you want. Here I am preparing the connectors to be
soldered on to the harness as well as showing the connections soldered and insulated.
It was fun to do, but with all the other things
ahead of me, I wish I didn't have to do this.
<a href="http://www.xoutpost.com/images/articles/58/P1010038.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010038_small1.JPG" alt="P1010038.jpg (46149 bytes)"/></a>

<a href="http://www.xoutpost.com/images/articles/58/P1010037.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010037_small1.JPG" alt="P1010037.jpg (29220 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010039.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010039_small.JPG" alt="P1010039.jpg (24942 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010040.jpg">

<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010040_small.JPG" alt="P1010040.jpg (38869 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010041.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010041_small.JPG" alt="P1010041.jpg (66205 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010042.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010042_small.JPG" alt="P1010042.jpg (34299 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010043.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010043_small.JPG" alt="P1010043.jpg (42997 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010044.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010044_small1.JPG" alt="P1010044.jpg (47220 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010045.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010045_small1.JPG" alt="P1010045.jpg (49818 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010046.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010046_small.JPG" alt="P1010046.jpg (35136 bytes)"/></a> 
Now for the antenna install. Here are pictures
of both the GPS and Diversity antenna installation. There are a total of 5 bolts
that hold the spoiler together. Two are under black grommets, pull them off.
Mount the GPS antenna with two bolts and secure the rubber grommet in hole next
to the antenna. Run the wire trough the hole on the other side and connect it to
the GPS antenna extension. For the Diversity antenna I mounted it on the top
part of the spoiler. It appears that there is another antenna up there, probably
for the radio. I used some silicon to fix the center part of the antenna to the
top of the spoiler. The inside of my spoiler was a bit dusty and dirty and the
adhesive contacts that come on the diversity antenna would not sick well. I
wound up popping a hole through an existing grommet for the existing antenna and
ran my wires through there. I put some silicone around the wire as it entered
the hole in the grommet to prevent leaks. Run the antenna wire out of the other
hole on the inside of the rear door. Now that both GPS and Diversity antenna
wires on on that side, tape them to the frame as they move along towards the
wire grommet that connects between the rear door and the body of the vehicle.
Use a wire hanger to snake the wires through the grommet. BE CAREFUL NOT TO
PULL THE WIRES TOO HARD. You can easily damage the coaxial cable or possibly
rip the connector ends off as you pull the wires through grommet. Do one wire at
a time. You'll have to pull the roof down a little to get to the wire as you
snake them into the roof of the body. I got some good close up shots of that.
Run them down the D pillar and not the C pillar, you'll save your self a big
head ache. Run the GPS antenna where the Nav brain will be mounted and run the
diversity antenna wires following the path of the nav harness down to the
multipurpose tray.

Phase 3: Dash Conversion
<a href="http://www.xoutpost.com/images/articles/58/P1110023.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010023_small1.JPG" alt="P1110023.jpg (29160 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010022.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010022_small.JPG" alt="P1010022.jpg (44863 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010020.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010020_small.JPG" alt="P1010020.jpg (66288 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1110024.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010024_small1.JPG" alt="P1010024.jpg (44443 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1000025.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010025_small1.JPG" alt="P1010025.jpg (62746 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1000026.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010026_small1.JPG" alt="P1010026.jpg (47052 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1000037.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010037_small2.JPG" alt="P1010037.jpg (46618 bytes)"/></a>

<a href="http://www.xoutpost.com/images/articles/58/P1000032.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010032_small.JPG" alt="P1010032.jpg (47888 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1000028.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010028_small1.JPG" alt="P1010028.jpg (50213 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1000034.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010034_small1.JPG" alt="P1010034.jpg (52097 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1000038.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010038_small2.JPG" alt="P1010038.jpg (55882 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1000029.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010029_small1.JPG" alt="P1010029.jpg (58919 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010027.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010027_small.JPG" alt="P1010027.jpg (59478 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1000030.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010030_small1.JPG" alt="P1010030.jpg (59777 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1000036.jpg">

<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010036_small.JPG" alt="P1010036.jpg (62597 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1000035.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010035_small1.JPG" alt="P1010035.jpg (63043 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1000033.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010033_small1.JPG" alt="P1010033.jpg (65581 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1000031.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010031_small1.JPG" alt="P1010031.jpg (67603 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1000039.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010039_small1.JPG" alt="P1010039.jpg (57384 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1000040.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010040_small1.JPG" alt="P1010040.jpg (53557 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1000041.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010041_small1.JPG" alt="P1010041.jpg (56061 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1111042.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1111042_small.JPG" alt="P1111042.jpg (61036 bytes)"/></a>
To cut the dash I used a dremel. Make sure you
have a little vacuum handy, there will be a lot of plastic everywhere when you're
done. The cutting went pretty smooth but I knew I was faced with a challenge
when it came time to figuring out how I am going to mount the brackets without
the Halter BoardMonitor Oben. I wound up finding some plastic that had a L shape
to it. I trimmed it up so that it can be screwed into the bottom part of the
vent divider and have a flat service where the clips would go. I dremeled a slit
in the flat part of the plastic so the screw can pass through the plastic when
the clip is on it. Make sure the clips sit leveled with the frame that divides
the air vent and the on-board monitor opening. Make sure the top part of the
brackets are not too forward and not set too far back. I filed down all the
edges when I was done and vacuumed everything, get inside the dash good. I actually
got a perfect flush fit the first time. 

If you bought the on-board monitor brand new
along with the housing, you will not get the screws that mount the monitor to
the housing. I was able to find screws that I had laying around from computer
parts. Make sure you can find the screws to mount the entire housing to the brackets,
the part # is in the parts list.
 
Phase 4: Radio Tuner / TV on Nav Module
<a href="http://www.xoutpost.com/images/articles/58/P1010052.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010052_small.JPG" alt="P1010052.jpg (52230 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010053.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010053_small.JPG" alt="P1010053.jpg (50779 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010032.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010032_small1.JPG" alt="P1010032.jpg (45263 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010033.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010033_small2.JPG" alt="P1010033.jpg (53497 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010034.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010034_small2.JPG" alt="P1010034.jpg (51209 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010035.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010035_small2.JPG" alt="P1010035.jpg (54478 bytes)"/></a>

<a href="http://www.xoutpost.com/images/articles/58/P1010055.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010055_small.JPG" alt="P1010055.jpg (48651 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010036.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010036_small1.JPG" alt="P1010036.jpg (50027 bytes)"/></a><a href="http://www.xoutpost.com/images/articles/58/P1010047.jpg"><img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010047_small1.JPG" alt="P1010047.jpg (59844 bytes)"/></a>
 
 
Money Shots:
<a href="http://www.xoutpost.com/images/articles/58/P1010066.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010066_small.JPG" alt="P1010066.jpg (35148 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010067.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010067_small.JPG" alt="P1010067.jpg (40967 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010072.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010072_small.JPG" alt="P1010072.jpg (59010 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010057.jpg">
<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010057_small.JPG" alt="P1010057.jpg (53646 bytes)"/></a>
<a href="http://www.xoutpost.com/images/articles/58/P1010065.jpg">

<img width="100" height="75" border="2" src="http://www.xoutpost.com/images/articles/58/P1010065_small.JPG" alt="P1010065.jpg (61275 bytes)"/></a>
   
 By: Joseph Puma <a href="mailto:[email protected]">[email protected]</a>